Pioneer ELITE Blu-ray Disc BDP-85FD, Руководство по эксплуатации

Страница: 22 / 192

02
22
En
Input device is
connected with the
ZERO SIGNAL terminal.
The Zero Signal is the reference (GND) for video and audio
signals. If you connect the
ZERO SIGNAL
terminal of the
equipment to the audio input terminal of another device
connected to this equipment, with a pin cord, the device
becomes compatible to the audio standard of this
equipment, and the signal integrity improves.
On the other hand, if you connect the video input terminal
of the device, it will become compatible to the video
standard of this equipment and the signal integrity will
improve.
Connecting components
to the USB port
About USB devices
The USB devices that can be connected to the player are
as shown below.
• USB 2.0-compatible USB flash drive (capacity of 1 GB
or greater, 2 GB or greater recommended) or HDD
(capacity 2 TB or less)
• File system: FAT16, FAT32 or NTFS
Note
• Devices formatted with a file system other than the
above cannot be used.
• USB devices may not be recognized if they contain
multiple partitions.
• Some USB devices may not operate with this player.
• Operation of USB devices is not guaranteed.
Connecting the USB device
Caution
• Be sure to turn the player’s power off before
connecting or disconnecting USB devices.
• When using an external hard disk as the external
storage device, be sure to turn on the hard disk’s
power before turning on the player’s power.
• If the USB device is write-protected, be sure to disable
the write-protection.
• When connecting the USB cable, hold onto the plug,
set the plug in the proper direction for the port and
insert it horizontally.
• Placing excessive loads on the plug may result in
poor contact, making it impossible to write data on
the USB device.
• When a USB device is connected and the player’s
power is turned on, do not unplug the power cord.
Note
• Devices may not work if connected to the
USB
port via
a memory card reader or USB hub.
• Use a USB cable with a length of 2 meters or less.
RS-232C
DIGITAL AUDIO OUT LAN
(10/100)
USB HDMI OUT
OPTICAL
MAIN SUB
COAXIAL
ZERO SIGNAL
A
udi
o o
r Vid
eo ca
bl
e
(co
mm
erc
ia
lly
avai
lab
le
)
AV receiver or TV etc.
To audio or video
input terminals
USB flash drive
BDP-88FD’s front panel
Hard disk, etc.
USB cable
(commercially
available)
RS-232C
DIGITAL AUDIO OUT LAN
(10/100)
USB OUT
OPTICAL
MAIN
COAXIAL
ZERO SIGNAL
USB flash drive
BDP-88FD’s rear panel
Hard disk, etc.
USB cable
(commercially
available)
BDP-85FD_88FD_72-BDP88FD-USAB1_En.book 22 ページ ２０１４年９月２４日 水曜日 午後４時３分