AUX OFF
: When not using a auxiliary
equipment.
!
AUX (Auxiliary) 0 dB/+6 dB
You can adjust the volume level of each
source to prevent radical changes in vo-
lume when switching between sources.
You can set to
0DB
or
+6DB
.
If the input level of the connected compo-
nent is not high enough, increase the input
level properly. Without adjusting the line
input level, you may be surprised at a loud
sound when you change the source from
the external component to another source.
!
DEMO ON/OFF
You can change the initial indication on the
display to information name (function
name, EQ name, etc...) while listen to a
source.
DEMO ON
: Displays information name
while listen to source.
DEMO OFF
: Cancels the function.
!
BEEP 2ND/ALL
Sets the beep sound every time a button is
pressed.
BEEP 2ND
: The beep is generated when a
key is long pressed (one sec.).
BEEP ALL
: The beep is generated when any
key is pressed.
#
You can also select one of the settings by
pressing
VOL
+/
–
on the remote control.
Basic operation
En
20
Section
05