Pioneer DV-S737, Инструкция по эксплуатации

Страница: 23 / 64

23
GETTING ST
AR
TED USING YOUR DVD PLA
YER
Resuming playback from
where you stopped
– DVD/Video CD
Use the resume feature to restart playback from the
point that the disc was stopped last time.
Press STOP
7
once.
The display shows “RESUME” and the stop position is
memorized.
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP
7
twice causes the disc to return to
the beginning when PLAY
3
is pressed again. The
display shows the disc type (DVDs or Video CDs).
Press PLAY
3
.
Playback starts from the resume position.
Notes
• The actual restart position may be slightly before or after
the resume position.
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead ( page 51 ).
0
4
¢
1
¡
7 0
8
3
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
SEARCH MODE STEP / SLOW RETURN
PREVIOUS NEXT REV FWD
PAUSE PLAY
VIDEO
ADJUST DIMMER JOG MODE
TOP MENU SET UP
DISPLAY AUDIO SUBTITLE ANGLE
OPEN /
CLOSE
FUNCTION
MEMORY
STOP
CLEAR
MENU
ENTER
V.ADJ FL F.MEM JOG
8 7 3
4 ¢ 1
e E
¡
4( 4 4 )
1
2
3
1, 2
1
Press STOP
7
(
7
/
0
on the front panel).
Playback stops.
2
Press OPEN/CLOSE (
7
/
0
on the front
panel).
The disc tray comes out.
3
Remove the disc.
4
Press STANDBY/ON on the front panel
( on the remote control). (Taiwan model)
The disc tray goes back in.
4 4
Press on the remote control. (Other
models)
The disc tray goes back in.
5 5
Press POWER on the front panel to turn
the player’s power off. (Other models)
4( 5 5 )