120
DV-AX10
7
Rear Panel
6
COMPONENT VIDEO OUT jacks
If your projection monitor, projector or similar component
has component video inputs, you can produce a higher
quality picture on your projection monitor or projector by
connecting to the component video outputs on this unit.
When using these jacks, be sure to set the
component
video output selection switch
to the correct position.
7
DIGITAL OUT jacks (coaxial(COAX)/optical (OPT))
Use to output the digital audio signal recorded on discs.
You can output the digital signal via either coaxial or
optical output jack to an AV amplifier or receiver.
8
PDIF jack
When using this player with the optional C-AX10 Digital
Control Amplifier, connect to this jack using the PDIF
cable supplied with the C-AX10.
9
Power cord
Use to connect the power cord to the wall outlet.
0
BALANCE ON/OFF switch
Use to set to
ON
if you are using the balanced audio
outputs.
-
AUDIO OUT FRONT jacks
Use to output two-channel audio (analog) to the audio
stereo inputs on a TV or stereo amplifier. If you are
connecting to a receiver that has both digital and analog
input jacks for DVD player connection, it may be
beneficial to make both connections .
1
Multichannel AUDIO OUT jacks
Use to output 6 discrete audio channels of decoded
digital audio to a receiver or amplifier with discrete audio
inputs.
2
CONTROL jacks
Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player’s
CONTROL IN
jack to the
CONTROL OUT
jack of another
PIONEER component bearing the
Î
mark, you can
control the player as though it were a component in a
system (system control).
• If you connect for system control, you cannot operate
the player directly. Point the remote control unit at the
component (AV amplifier, etc.) connected to the
• When controlling as a system, be sure to make a
connection to the amplifier using an audio or video
cord, even when using only digital components.
• For details, refer to the operation manuals of the
Connect to the video input on a TV, monitor, AV amplifier
or receiver with video input capability.
4
S-VIDEO OUT jacks
If your TV or monitor has an
S-VIDEO
input, clear picture
reproduction is possible by connecting the player to your
TV or monitor via the
S-VIDEO
jack.
5
Component video output selection switch
Use to set the scanning system (interlace, progressive,
menu setting) being used by the TV, monitor, or projector
connected to the
COMPONENT VIDEO OUT
jacks.
* The rear and under section of this appllance are copper plated to ensure quality sound. It may sometimes happen that marks
are left during the plating process, but this does not affect performance.
R
L
SURROUND
SUB
WOOFER
CENTER
CONTROL
IN
OUT
AUDIO OUT
BALANCE
1 - GND
2 - HOT (+)
3 - COLD (-)
FRONT
OPT
2COAX 1COAX
PCM
R
L
DIGITAL OUT
PDIF
OFF ON
2
1
Y
P
B
P
R
525i
(480i)
525p
(480p)
2
1
menu
select
VIDEO OUT
COMPONENT VIDEO OUT
S-VIDEO OUT
1
2
3
4 5
6
9
7
8
-
0
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
