Pioneer DV-79AVi-s Elite, Руководство по обслуживанию

Страница: 87 / 108

DV-79AVi
87
5 6 7 8
5 6
7
8
C
D
F
A
B
E
7.1.6 ERROR DISPLAY
FL Display Possible causes Operation of the unit
AV1 VER AV-1 chip is not a match with the program of system controller
The sound may not out with
the specific audio.
CPU AERR CPU address error (Hardware is unusual.) No operation
DMA AERR DMA address error (Hardware is unusual.) No operation
FLASH ID
Difference in versions of the internal ROM of the system controller and of the flash
ROM, or bus line failure or reverse installation
No operation
FLASH WRP Write protect error of the flash ROM No operation
FLASH SIG
Difference in part number of the flash ROM (When the ROM which could't be used
was used.)
No operation
FLASH SUM
Check sum error of the flash ROM (It exceeds the regular size.) or reverse installation
(Hardware is unusual.)
No operation
FLASH SIZ Size error of the flash ROM (Use 4 or 8 M-bit.) No operation
GUI ROM ERROR Difference in version of GUI ROM and system controller software. Operate as the OSD model
ILLGAL
The system controller fetched a code other than an operation code (Hardware is
unusual.)
No operation
MECHA CPU
Difference in version of the internal ROM of the mechanism controller and of the flash
ROM.
No operation
RESERVE Undefined interrupt (Hardware is unusual.) No operation
SLOT Inappropriate slot command issued (Hardware is unusual.) No operation
FL
Description of
Error
Causes if with a DVD Causes if with a CD Operation of the Unit
11 Search timeout
Search could not be complete within 7
seconds.
Search could not be complete within 7
seconds, and it could not enter the target
area within 7 seconds by VCD scan.
CD : Stops,
DVD: Continues operation
12
Search retry
error
More beyond the target while the read-in search was converging. A search could not
be completed after 3 retries while the unit was tracing 11 tracks. A search could not
be completed after retry when timeout occurs at read-in.
CD: Stops,
DVD: Continues operation
19
Tracing timeout
while converging
Timeout (10.5 seconds) while tracing at
the stage of convergence of a search.
Stop
1B
Index 0 search
error
During Track (Index) Search, the search
for the beginning of a program could not
be completed within 3 seconds (20
seconds in the case of Index Search)
after positioning based on the TOC data
was completed.
Stop
1C
Embossment
plunge error
(only a model
corresponding to
RW)
Plunged into unreadable embossment of
DVD-RW player.
1. In wobble nothing (error
distinction) : search to
address 2E400h
2. In wobble existence:
Tray open
22
Timeout of slider
inner
circumference
Inside switch could not ON within 3 seconds. Stop
23
Timeout of slider
outer
circumference
Inside switch could not OFF within the following times:
at ATB: 2 seconds, at Backup: 2 or 2.02 seconds.
Stop
33
No FOK pulse
during playback
When the focus was deviated continuously 20 times.
Adjusts focus at the innermost
circumference and tries to
return to its position where the
error was generated (for 3
times),then opens.
If the same error persists after
one retry, the tray opens. (No
FOK pulse)
38 Disc-type-
sensing error
Were not able to playback from the disc distinction process.
PLAY or STOP was not completed by backup operation of the disc distinction.
Distinguished it from the blank disc in the ATB process completion.
Open
Error codes that are displayed on the FL display without using the remote control unit
Error codes that are displayed on the FL display by using the remote control unit
(Mechanism controller error)
To display: ESC + D DISPLAY; Location of the display: At the two digits of center of the FL display
To display the error history: ESC + D One shot; Location of the display: TV screen