24
En
Connecting Up
2
AV CONNECTOR 1 (RGB)-TV
1
IN
DIGITAL OUT
AUDIO OUT
AUDIO OUT
L
R
L
R
CONTROL
OPTICAL
COAXIAL
AC IN
AV CONNECTOR 2
2
OUT
(5.1CH)
(2CH)
VIDEO
OUT
S-VIDEO
OUT
1
2
1
2
FRONT
SURROUND
SUB
WOOFER
CENTER
1
2
3
Easy Setup
This easy setup is the minimum set of connections you
need to start watching DVD video discs. Both sound and
picture are fed directly to your TV using the supplied
audio and video cables. For other possible connections,
see
pages 28 and 32
.
Important
Before making or changing any rear panel connections, make sure
that all components are switched off and unplugged from the wall
outlet.
Connect to a composite video input on
your TV using the supplied yellow video
cable.
Plug into a standard AC
wall outlet.
Connect to a pair of stereo audio inputs on
your TV using the supplied red/white stereo
audio cable.
Connecting audio and video cables
Be sure to insert each plug fully for
the best connection. The plugs and
jacks are colour-coded to make
connection easier.
Connecting control cables
Use a stereo mini-plug cable (not supplied) to connect the
CONTROL OUT
of your Pioneer amplifier/receiver to the
CONTROL IN
of this unit. This allows you to operate this
unit with the amplifier/receiver’s remote control. See the
instruction manual that came with your amplifier/receiver
for more detailed instructions. Add more components to
the chain by connecting the
CONTROL OUT
of this unit
to the
CONTROL IN
of other Pioneer components.
Important
In order to properly ground this player, you must connect at least
one audio cable (not including an optical cable) in addition to the
control cable.
