Pioneer DV-490V-S, Руководство по эксплуатации

Страница: 20 / 72

Getting started
05
20
En
Chapter 5
Getting started
Important
• Many of the buttons used extensively in this chapter
are used in conjuction with the SHIFT button.
The cursor buttons (
///
),
ENTER
,
SETUP
and
MCACC should all be used with SHIFT in the
following explanations.
System demo setting
Switches the automatic demo feature on or off (this
starts when you plug in for the first time).
1 Switch the system into standby.
2 Press SHIFT+ SETUP .
3 Use the SHIFT+
/
(cursor left/right) buttons to
select DEMO from the menu, then press SHIFT+ ENTER .
4 Use the SHIFT+
/
(cursor up/down) buttons to
select a setting, then press SHIFT+ ENTER .
Select from:
•
DEMO ON
– Switches the demo display on.
• DEMO OFF – Switches the demo display off and the
system into standby.
Using the Auto MCACC setup for
optimal surround sound
The Multichannel Acoustic Calibration (MCACC) system
measures the acoustic characteristics of your listening
area, taking into account ambient noise, and testing for
channel delay and channel level. After you have set up
the microphone provided, the system uses the
information from a series of test tones to optimize the
speaker settings and equalization (Acoustic Calibration
EQ) for your particular room.
1
Important
• The test tones used for Auto MCACC setup are loud;
however, do not turn the volume down during setup
as this may result in a sub-optimal setup.
• Make sure the microphone and speakers are not
moved during the MCACC setup.
1 Connect the microphone to the MCACC SETUP MIC
jack on the rear panel.
2 Place the microphone at your normal listening
position.
Place the mic horizontally about ear level at your normal
listening position using a table or chair.
Make sure there are no obstacles between the speakers
and the microphone.
TUNE
TUNE
SOUND
TOP MENU MENU
SETUP
TEST
TONE
ST ST
/ /
MCACC
RETURN
SURROUND
ADVANCED
SR
ENTER
ENTER
CLEAR
SHIFT TV CONTROL
TV
INPUT
CHANNEL
SOUND
RETRIEVER
VOLUME
PLAY MODE ZOOM DISPLAY SLEEP
AUDIO SUBTITLE ANGLE
Note
1 You only need to use the Auto MCACC setup once (unless you change the placement of your speakers or your room layout).
DVD
VOLUME
RECEIVER
SURROUND
SR
DVD DTV PC/GAME AUX
MUTE
TUNER
TUNE
TUNE
SOUND
TOP MENU MENU
SETUP
TEST
TONE
ST ST
/ /
MCACC
RETURN
ADVANCED
ENTER
ENTER
CLEAR
SHIFT TV CONTROL
TV
INPUT
CHANNEL
SOUND
RETRIEVER
VOLUME
PLAY MODE ZOOM DISPLAY SLEEP
AUDIO SUBTITLE ANGLE
SPEAKERS
SUB WOOFER
CENTER
SURROUND
DIGITAL
AUDIO INPUT
ANTENNA
FM
UNBAL
AM
LOOP ANTENNA 75
Ω
R L
R
L
FRONT
R L
CONTROL IN MCACC
SETUP MIC
CONTROL
OUT
SYSTEM CONNECTOR
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
AC IN
ANALOG
DTV
(OPTICAL)
DVD
(COAXIAL)
AUX PC/GAME
(OPTICAL)
SX-SW560_KU.book Page 20 Wednesday, March 29, 2006 2:48 PM