En
Appendix
06
English
43
<J2M90321A>
Additional information
43
Setting the TV system
If the picture of the disc being played is
distorted, switch the TV system to the one
used in your country or region.
When the TV system is switched, the
types of discs that can be played are
limited.
The factory default setting is AUTO.
1 Turn the player’s power off.
Press
STANDBY/ON
.
2 Press
STANDBY/ON while pressing
.
Use the buttons on the player’s front panel.
The power turns on and the TV system
switches as shown below.
AUTO
NTSC
NTSC
PAL
PAL
AUTO
Types of
discs/
files
Format
Player setting
NTSC
PAL
AUTO
NTSC
NTSC PAL
NTSC
PAL
NTSC PAL
PAL
no disc
—
NTSC PAL
NTSC
or
PAL
Cautions on use
When moving the player
When moving the player, check first that
there is no disc loaded and that the disc tray
is closed. Then press
STANDBY/ON
on
the player (or
STANDBY/ON
on the remote
control), wait for the
- OFF -
indicator on the
front panel display to turn off, then unplug
the power cord. Moving the player with a disc
inside it could result in damage.
Place of installation
Choose a stable place near the TV or ste-
reo system being used with the player.
Do not place the player on top of a TV or
color monitor. Also install it away from
cassette decks and other devices easily
affected by magnetic forces.
Avoid the following types of places:
Places exposed to direct sunlight
Humid or poorly ventilated places
Extremely hot places
Places exposed to vibrations
Dusty places
Places exposed to soot, steam or heat
(kitchens, etc.)
Do not place objects on the player.
Do not place any objects on top of the player.
Do not obstruct the ventilation holes.
Do not use the player on shaggy rugs, beds,
sofas, etc., or wrapped in cloth, etc. Doing so
will prevent the heat from dispersing, leading
to damage.
Do not expose to heat.
Do not place the player on top of an ampli-
fier or other component that generates heat.
When placing it in a rack, to avoid the heat
given off by the amplifier or other audio
component, place it on a shelf below the
amplifier.
