Additional information
08
42
En
Note
• Using the
16:9 (Wide)
setting with a
standard 4:3 TV, or either of the 4:3 settings
with a widescreen TV, will result in a
distorted picture.
Resetting the player
Use this procedure to reset all the player’s
settings to the factory default.
1
Switch the player into standby.
2
Using the front panel buttons, hold
down the
(stop) button and press
STANDBY/ON to switch the player back
on.
All the player’s settings are now reset.
DVD-Video regions
All DVD-Video discs carry a region mark on the
case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD player also has a region mark,
which you can find on the rear panel. Discs
from incompatible regions will not play in this
player. Discs marked
ALL
will play in any
player.
The diagram below shows the various DVD
regions of the world.
Selecting languages using the
language code list
Some of the language options (such as ‘DVD
Menu Lang.’ in the Setup Navigator) allow you
to set your preferred language from any of the
136 languages listed in the language code list
on page 46.
1
Select ‘Other Language’.
2
Use the
/
(cursor left/right) buttons
to select either a code letter or a code
number.
3
Use the
/
(cursor up/down) buttons
to select a code letter or a code number.
See
Language code list
on page 46 for a
complete list of languages and codes.
1
2
2
5
5
6
3
2
1
4
4
DV393 KU.book Page 42 Thursday, March 16, 2006 1:17 PM
