DRM-7000, DRM-AF751, DRM-AL751, DRM-AH721, DRM-PW701
150
[ Rear ]
1
Rear plates
These plates cover the space for attaching the connector
panels.
2
Rear access door
3
Drive SCSI ports (attached connector panel)
4
SCSI ID switch (ID)
This switch is used to assign the changer SCSI ID. If you
would like to decrement the displayed SCSI ID, push the
small switch just above the numeric display by a nib. And if
you would like to increment, push the small switch just
below the numeric display. Note that SCSI ID is set to ‘6’ at
the time of shipment.
5
SCSI termination switch (TERM)
This switch is for SCSI termination. Note that this switch is
set ON at the time of shipment and it must be kept ON
during the changer installation. But when the SCSI bus
[ Rear access door INSIDE ]
1
2
TERM
OFF
ON
ID
C H A N G E R S C S I
ON
OFF
GND
POWER
A C I N
7
8
3
6
5
4
9
connection is completed and the changer is not the last
device on the SCSI bus, it must be set OFF certainly.
6
Changer SCSI ports (CHANGER SCSI)
7
Power switch (POWER)
This switch is used to turn the power to the changer on
and off.
8
Power inlet (AC IN)
The power cord is inserted into this power inlet. (Note that
you should always be sure to use only the power cord pro-
vided with your changer.)
9
Rear bays
The rear bays are designed as the multipurpose bays. For
the 50-disc magazines, these bays are similar to the front
magazine bays and they are assigned M8-M15. But the
rear bays are some
REAR PANEL
Содержание DRM-7000
Страница 65: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 65 A B C D 5 6 7 8 5 6 7 8 CN501 T CN306 CN305 CN304 S ...
Страница 67: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 67 A B C D 5 6 7 8 5 6 7 8 CN301 U CN504 CN505 CN506 T ...
Страница 69: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 69 A B C D 5 6 7 8 5 6 7 8 CN501 V CN306 CN305 CN304 U ...
Страница 71: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 71 A B C D 5 6 7 8 5 6 7 8 CN504 CN505 V ...