141
DRM-7000, DRM-AF751, DRM-AL751, DRM-AH721, DRM-PW701
Removing the Carriage Base
Removing the VD Motor Fixing Plate
Reattaching the Carriage Base
1. Reattach the Carriage Base with the four screws with the
table of the Carriage Base Assy touching the under chassis.
Caution: Be sure to proceed with this step with the Carriage
Base Assy touching the under chassis.
Otherwise, the table of the Carriage Base Assembly
will be deformed.
Entering Adjustment Mode
1. Locate the Carriage Aase Assy at an address between
200 and 250.
2. Proceed the each adjustment.
Open the Front and Rear Doors. Turn off the power.
Move the Carriage Base Assy down until it touches the under
chassis by manually rotating the shaft of the elevator motor.
Caution: If the Carriage Base Assy does not touch the
under chassis, the table of the Carriage Base Assy
will be deformed.
Remove the four screws (PMB30P060FMC) and remove the
Carriage Base.
Remove the side panel, located at lower-right viewed from
the front.
Remove the four screws (ABZ30P060FMC).
Remove the spring, belt and two connectors.
×
4
2
4
2
2
3
1
2
3
3
3
3
1
Carriage base
Carriage Base
Belt
Spring
Two
connectors
×
4
3
Содержание DRM-7000
Страница 65: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 65 A B C D 5 6 7 8 5 6 7 8 CN501 T CN306 CN305 CN304 S ...
Страница 67: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 67 A B C D 5 6 7 8 5 6 7 8 CN301 U CN504 CN505 CN506 T ...
Страница 69: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 69 A B C D 5 6 7 8 5 6 7 8 CN501 V CN306 CN305 CN304 U ...
Страница 71: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 71 A B C D 5 6 7 8 5 6 7 8 CN504 CN505 V ...