En
21
Advanced
Operation
Using external inputs
This unit is equipped with two external input systems that can be used
for connecting DJ players or analog players. The 2-channel mixer of
this unit can mix the sound of the external input without a computer.
The mixer functions described below operate even if the unit is not con-
nected to a computer.
!
For details on the respective items, see
Connecting input terminals
(p. 11 ) and
Part names and functions
(p. 6 ).
!
The fader start function (move the channel fader or crossfader while
pressing the [
SHIFT
] button) cannot be used for the external input.
!
The values adjusted with the various controls for the Serato DJ soft-
ware differ from values adjusted for the external input.
Mixer section
3
3
d
d
1
1
2
2
6
6
a
c
8
b
4
5
5
7 9
1
TRIM
control
2
ISO
(
HI
,
MID
,
LOW
) control
3
FILTER
control
4
Headphone
CUE
fader
5
Channel fader
6
Channel Level Indicator
7
MASTER LEVEL
control
8
Master level indicator
9
BOOTH MONITOR LEVEL
control
a
HEADPHONES MIX
control
b
Crossfader
c
HEADPHONES LEVEL
control
d
INPUT SELECT
switch
Front panel
1
4
3 32
2
1
CROSS FADER CURVE
adjustment control
2
CH FADER CURVE
adjustment control
3
CH FADER REVERSE
switch
4
CROSS FADER REVERSE
switch
Mixing the sound of the microphone
1 Connect the microphone to the [MIC] terminal.
2 Set the [ON, OFF] selector switch to [ON].
—
[
MIC TALK OVER
]: The indicator flashes.
—
[
TALKOVER OFF
]: The indicator lights.
!
When set to [
MIC TALK OVER
], the sound of channels other than
the [
MIC
] channel is attenuated by 18 dB (default) when a sound of
–10 dB or greater is input to the microphone.
!
The sound attenuation level of [
MIC TALK OVER
] can be changed
in the utilities mode. For instructions on changing the setting, see
Changing the settings of this unit in the utilities mode
(p. 32 ).
3 Turn the [MIC LEVEL] control.
The level of the sound input from the [
MIC
] channel is adjusted.
!
Pay attention that rotating to the extreme right position outputs a
very loud sound.
4 Input audio signals to the microphone.
Adjusting the sound quality
Turn the [MIC] channels’ [EQ (HI, LOW)] controls.
Applying an echo to the microphone sound
An echo can be applied to the microphone sound by turning the
[
MIC ECHO
] control.
Mixing the sound of a DJ player, etc.
1 Connect a DJ player or other line level output device
to the [CD/LINE] terminals.
2 Set the [INPUT SELECT] switch to [CD/LINE].
3 Operate the [TRIM] control and the channel faders to
adjust the audio level output from the respective decks.
!
The sound can be adjusted with the [
ISO
(
HI
,
MID
,
LOW
)] controls,
and filter effects can be applied to the respective channels with the
[
FILTER
] control.
Mixing the sound of analog player, etc
1 Connect the analog player or other phono level (for
MM cartridges) output device to the [PHONO] terminals.
2 Set the [INPUT SELECT] switch to [PHONO].
3 Operate the [TRIM] control and the channel faders to
adjust the audio level output from the respective decks.
!
The sound can be adjusted with the [
ISO
(
HI
,
MID
,
LOW
)] controls,
and filter effects can be applied to the respective channels with the
[
FILTER
] control.
