Pioneer DJM-2000nexus, Инструкция по эксплуатации

Страница: 27 / 100

27
En
English
Changing the settings
1
1
Setup item button
1 Press [LIVE SAMPLER (UTILITY, WAKE UP)] for at least
1 seconds.
The [ USER SETUP ] mode setting screen is displayed.
The [
LIVE SAMPLER
(
UTILITY
,
WAKE UP
)] indicator flashes.
! To display the [ CLUB SETUP ] screen, first turn this unit’s power
off, then press [
POWER
] while pressing [
LIVE SAMPLER
(
UTILITY
,
WAKE UP )].
2 Press the setup item button.
The selection items appear.
3 Select the setup item.
Select the item on the touch panel and enter it.
4 Change the item’s setting.
Select the item on the touch panel and enter it.
!
Press [ SAVE ] to save the changes to the [ CLUB SETUP ] screen.
5 Press [EXIT].
Close the [
USER SETUP
] mode setting screen.
! To close the [ CLUB SETUP ] mode setting screen, press the [ POWER ]
button to turn this unit’s power off.
Setting preferences
Settings indicated in italics are the default settings set upon purchase.
Mode Options settings Selection item 1 Selection item 2 Selection item 3 Descriptions
USER SETUP
MIDI
ZONE1
1
BUTTON ACTION
TOGGLE Select the MIDI signal sending method, [
TOGGLE
]
or [
TRIGGER
].
TRIGGER
MIDI CHANNEL 1 , 2 , to 16 Sets the MIDI channel.
ZONE2
2
BUTTON ACTION
TOGGLE Select the MIDI signal sending method, [ TOGGLE ]
or [ TRIGGER ]. TRIGGER
MIDI CHANNEL 1 , 2 , to 16 Sets the MIDI channel.
RESET —
Restores the [ TYPE A ] – [ TYPE D ] MIDI settings
to the default values. [ RESET ] function is unique
to [ ZONE2 ].
FADER START
LINK CH1 to CH4 ON , OFF
Turns the fader start function on and off for all DJ
players connected to the [
LINK ] terminals.
CONTROL CH2
,
CH3 ON
,
OFF
Turns the fader start function of the DJ players
connected to the [
CONTROL
] terminals on and off.
LCD BACK LIGHT
1
,
2
,
3
,
4
,
5
— Adjusts the touch panel’s brightness.
VERSION No. — — — Displays this unit’s software version.
QUANTIZE QUANTIZE ON , OFF —
Turns use of the beat information obtained from
the player on and off.
CLUB SETUP
SYSTEM
DIGITAL OUT MAX LEVEL –19 dB , –15 dB , –10 dB , –5 dB —
Sets the maximum level of the sound output from
the [
DIGITAL OUT ] terminals.
1
DIGITAL SAMPLING RATE 48 kHz , 96 kHz — Sets the digital signal’s sampling rate.
AUTO STANDBY ON , OFF — Turns the auto standby function on and off.
MIC
OUTPUT TO BOOTH
MONITOR
ON
,
OFF
—
Sets whether or not to output the microphone’s
audio signals from [
BOOTH
] terminals.
TALK OVER THRESHOLD
LEVEL –25 dB , –20 dB , –15 dB ,
–10 dB
—
Sets the talkover sensitivity. The talkover function
is activated when a sound with a volume above the
set volume is input to the microphone.
TALK OVER LEVEL
–25 dB , –20 dB , –15 dB ,
–10 dB
—
Sets the attenuation level for the sound other than
the microphone’s sound when the talkover func-
tion is activated.
TOUCH PANEL — — —
The touch panel’s calibration is adjusted by press-
ing [
+ ] in order.
PEAK LIMITER PEAK LIMITER ON , OFF —
Alleviates sudden, unpleasant digital clipping of
the master output.
FACTORY RESET YES , NO — — Restores all the settings to their factory defaults.
1 Changes the MIDI settings of the buttons on the control panel, [ FREQUENCY MIX ] and [ SIDECHAIN REMIX ].
2 Changes the MIDI settings for [ TYPE A ] to [ TYPE D ] on the MIDI control screen.
About the auto standby function
When [ AUTO STANDBY ] is set to [ ON ], the standby mode is set automatically if 4 hours pass with all of the conditions below met.
—
That none of this unit’s buttons or controls are operated.
— That no audio signals of –10 dB or greater are input to this unit’s input terminals.
—
That no PRO DJ LINK connections are made.
!
The standby mode is canceled when [ LIVE SAMPLER ( UTILITY , WAKE UP )] is pressed.