3
DJC-800RV
English
English
WARNING
Do not attempt to install this kit by your-
self!
This kit requires professional expertise and must
be installed by a specially trained technician.
For details, inquire at your nearest authorized Pio-
neer service center. (Consult your retail dealer for
more information regarding authorized Pioneer
service centers.)
NOTE:
Installation of this kit requires specialized professional
training and expertise. Consult your nearest autho-
rized Pioneer service center for installation (
installa-
tion fee must be paid by user
).
Attempting to install this kit by yourself can be very
dangerous, and may result not only in damage to the
unit, but fire or electrical shock. Pioneer can accept
no liability for injuries or damages resulting from in-
stallations or modifications performed by the cus-
tomer.
To the Installing Service Personnel
Install this panel unit as depicted in the accompanying
illustrations and instructions.
÷
Before beginning work, be sure to disconnect the
power cord from its supply outlet.
1. Pull off the 4 fader slider knobs.
2. Remove the 4 screws at the four corners of
the fader panel, and remove the panel.
5. Connect the 4 cable connectors for the fader
units to be installed (total 4).
÷
Insert the connectors securely, taking care not
to mistake the order in which the connectors
are attached (connectors for odd-numbered
channels are white, while connectors for even-
numbered channels are yellow. Attach connec-
tors of the same color together).
6. Insert the fader panel and fasten with the
four corner screws (total 4).
÷
Take care not to allow any wiring to be caught
under the panel.
÷
Carefully store all removed parts (lever knobs
(4), panel (1), slide volumes (4), and mounting
screws (8)).
1
1
1
1
2
2
2
2
6
6
6
6
3
3
3
3
4
4
4
4
4
4
4
4
5
5
5
5
3. Disconnect the 4 cable connectors.
4. Remove the 2 mounting screws for each slide
volume (total 8 screws), and remove the 4
slide volumes.
