Basic Operations
Power ON/OFF
Turning the unit on
%
Press SOURCE to turn the unit on.
Turning the unit off
%
Press SOURCE and hold until the unit
turns off.
Selecting a source
You can select a source you want to listen to.
%
Press SOURCE to select a source.
Press
SOURCE
repeatedly to switch between
the following sources.
Tuner
—
Built-in CD player
—
AUX
Notes
!
In the following cases, the sound source will
not change.
—
When there is no disc in the unit.
—
When AUX (auxiliary input) is set to off
(refer to page 9).
!
AUX is set to on by default. Turn off the AUX
when not in use (refer to
Switching the auxili-
ary setting
on page 9).
!
When this unit
’
s blue/white lead is connected
to the vehicle
’
s auto-antenna relay control
terminal, the vehicle
’
s antenna extends when
this unit
’
s source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%
Turn VOLUME to adjust the sound
level.
Tuner
Listening to the radio
1
Press SOURCE to select the tuner.
2
Press BAND to select a band.
Press
BAND
until the desired band (
F1
,
F2
,
F3
for FM or
AM
) is displayed.
3
To perform manual tuning, briefly press
c
or
d
.
4
To perform seek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by briefly pressing
c
or
d
.
#
While pressing and holding
c
or
d
, you can
skip stations. Seek tuning starts as soon as you
release
c
or
d
.
Storing and recalling broadcast
frequencies
%
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
Memorized radio station frequency can be re-
called by pressing the preset tuning button.
#
Up to 18 FM stations, six for each of the three
FM bands, and six AM stations can be stored in
memory.
#
Press
a
or
b
to recall radio station frequen-
cies.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Press FUNCTION to select LOCAL.
2
Press
a
or
b
to turn local seek tuning
on or off.
3
Press
c
or
d
to set the sensitivity.
FM:
LOCAL 1
—
LOCAL 2
—
LOCAL 3
—
LOCAL 4
AM:
LOCAL 1
—
LOCAL 2
Operating this unit
En
6
Section
02