Pioneer DEH-X5600HD, Руководство пользователя

Страница: 10 / 64

Black plate (10,1)
Starting procedure for iPhone users
1 Connect an iPhone to USB input.
2 Switch the source to APP.
3 Start up the application on the iPhone
and initiate playback.
Basic operations
Selecting a track
1
Press
c
or
d
.
Fast forwarding or reversing
1
Press and hold
c
or
d
.
Pausing playback
1
Press BAND / to pause or resume.
Switching the display
Selecting the desired text information
1
Press
DISP
to cycle between the following:
!
TRACK INFO (track title/artist name/album
title)
!
APP NAME (application name)
!
ELAPSED TIME (playback time)
!
CLOCK
(source name and clock)
!
SPEANA (spectrum analyzer)
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
PAUSE
(pause)
1
Press M.C. to pause or resume.
S.RTRV
(sound retriever)
1
Press M.C. to select the desired setting.
1
—
2
—
OFF (off)
1 is effective for low compression rates, and 2
is effective for high compression rates.
Audio adjustments
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
Once selected, the following audio functions
can be adjusted.
!
FADER is not available when SUB.W/SUB.W
is selected in SP-P/O MODE . For details, refer
to SP-P/O MODE (rear output and preout set-
ting) on page 12.
!
SUB.W
and
SUB.W CTRL
are not available
when REAR/REAR is selected in
SP-P/O MODE . For details, refer to
SP-P/O MODE (rear output and preout set-
ting) on page 12.
!
SUB.W CTRL is not available when SUB.W is
selected in OFF . For details, refer to SUB.W
(subwoofer on/off setting) on page 10.
!
SLA is not available when FM is selected as
the source.
FADER (fader adjustment)
1
Press M.C. to display the setting mode.
2
Turn M.C. to adjust the front/rear speaker bal-
ance.
BALANCE (balance adjustment)
1
Press M.C. to display the setting mode.
2
Turn M.C. to adjust the left/right speaker bal-
ance.
EQ SETTING (equalizer recall)
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the equalizer.
POWERFUL
—
NATURAL
—
VOCAL
—
CUS-
TOM1
—
CUSTOM2
—
FLAT
—
SUPER BASS
The equalizer band and equalizer level can be
customized when
CUSTOM1
or
CUSTOM2
is
selected.
If selecting
CUSTOM1 or CUSTOM2 , complete
the procedures outlined below. If selecting
other options, press
M.C. to return to the pre-
vious display.
!
CUSTOM1 can be set separately for each
source. However, USB , iPod , PANDORA
and APP are all set to the same setting au-
tomatically.
!
CUSTOM2
is a shared setting used in com-
mon for all sources.
3
Press M.C. to display the setting mode.
4
Press M.C. to cycle between the following:
Equalizer band
—
Equalizer level
5
Turn
M.C.
to select the desired setting.
Equalizer band: 80HZ
—
250HZ
—
800HZ
—
2.5KHZ
—
8KHZ
Equalizer level: +6 to
–
6
LOUDNESS (loudness)
Loudness compensates for deficiencies in the low-
frequency and high-frequency ranges at low vol-
ume.
1
Press M.C. to select the desired setting.
OFF
(off)
—
LOW
(low)
—
MID
(mid)
—
HI
(high)
SUB.W (subwoofer on/off setting)
This unit is equipped with a subwoofer output
which can be turned on or off.
1
Press M.C. to select the desired setting.
NOR (normal phase)
—
REV (reverse phase)
—
OFF (subwoofer off)
SUB.W CTRL (subwoofer adjustment)
Only frequencies lower than those in the selected
range are outputted from the subwoofer.
1
Press M.C. to display the setting mode.
2
Press
M.C.
to cycle between the following:
Cut-off frequency
—
Output level
—
Slope level
Rates that can be adjusted will flash.
3
Turn M.C. to select the desired setting.
Cut-off frequency:
50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
—
160HZ
—
200HZ
Output level:
–
24 to +6
Slope level:
–
12
— –
24
BASS BOOST (bass boost)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select a desired level.
0
to
+6
is displayed as the level is increased or
decreased.
HPF SETTING
(high pass filter adjustment)
Use this function when wanting to listen only to
high-frequency sounds. Only frequencies higher
than the high-pass filter (HPF) cutoff are output
from the speakers.
1
Press M.C. to display the setting mode.
2
Press M.C. to cycle between the following:
Cut-off frequency
—
Slope level
3
Turn M.C. to select the desired setting.
Cut-off frequency: OFF
—
50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
—
160HZ
—
200HZ
Slope level:
–
12
— –
24
Using this unit
10
Section
Using this unit
En
02
<QRD3199-A>10