Pioneer DEH-X2600UI, Руководство пользователя

Страница: 12 / 64

Black plate (12,1)
2 Turn M.C. to display ILLUMI and press to
select.
3 Turn M.C. to display KEY COLOR or
DISP COLOR. Press to select.
4 Press M.C. and hold until the customizing
illumination color setting appears in the dis-
play.
5 Press M.C. to select the primary color.
R (red)
—
G (green)
—
B (blue)
6 Turn M.C. to adjust the brightness level.
Adjustment range: 0 to 60
#
You cannot select a level below 20 for all three of
R (red), G (green), and B (blue) at the same time.
#
You can also perform the same operation on
other colors.
Note
You cannot create a custom illumination color
while
SCAN is selected.
About MIXTRAX
MIXTRAX technology is used to insert a variety
of sound effects in between songs, allowing you
to experience your music as a nonstop mix com-
plete with visual effects.
Notes
!
Depending on the file/song, sound effects
may not be available.
!
Turn MIXTRAX off if the visual effects it pro-
duces have adverse effects on driving. Refer
to
Operations using the MIXTRAX button on
page 6.
MIXTRAX menu
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select MIXTRAX.
3 Turn M.C. to select the MIXTRAX func-
tion.
Once selected, the following MIXTRAX functions
can be adjusted. The function is enabled when
MIXTRAX is on.
!
FLASH AREA and FLASH PATTERN are not
available for DEH-X2600UI and DEH-X26UI.
!
MIX PATTERN is not available for DEH-
X3600UI and DEH-X36UI.
SHORT PLAYBCK/SHORT MODE (short playback
mode)
You can select the length of the playback time.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
1.0 MIN (1.0 minute)
—
1.5 MIN (1.5 minutes)
—
2.0 MIN
(2.0 minutes)
—
2.5 MIN
(2.5 minutes)
—
3.0 MIN (3.0 minutes)
—
OFF (off)
FLASH AREA
(flash area)
You can select areas for flashing colors.
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the desired setting.
KEY/DISPLAY (key and display)
—
KEY (key)
—
OFF (off)
!
When OFF is selected, the color set under IL-
LUMI
is used as the display color.
FLASH PATTERN (flash pattern)
The flashing color and MIXTRAX special effects
display change with changes in the sound and
bass levels.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
!
SOUND LEVEL 1
to
SOUND LEVEL 6
–
The
flash pattern changes according to the
sound level. Select a desired mode.
!
LOW PASS 1 to LOW PASS 6
–
The flash
pattern changes according to the bass
level. Select a desired mode.
!
RANDOM 1
–
The flash pattern changes
randomly according to the sound level
mode and low pass mode.
!
RANDOM 2
–
The flash pattern changes
randomly according to the sound level
mode.
!
RANDOM 3
–
The flash pattern changes
randomly according to the low pass mode.
MIX PATTERN (mix pattern)
The MIXTRAX special effects display changes with
changes in the audio level.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
!
SOUND LEVEL
–
The mix pattern changes
according to the sound level.
!
LOW PASS
–
The mix pattern changes ac-
cording to the bass level.
!
RANDOM
–
The mix pattern changes ran-
domly according to the sound level mode
and low pass mode.
DISPLAY FX/DISP FX
(display effect)
The MIXTRAX special effects display can be turned
on or off.
1
Press M.C. to select the desired setting.
ON (MIXTRAX special effects display)
—
OFF
(normal display)
CUT IN FX
(manual cut-in effect)
You can turn on or off the MIXTRAX sound effects
while manually changing tracks.
1
Press M.C. to select the desired setting.
ON (on)
—
OFF (off)
Initial menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press M.C. to display the main menu.
3 Turn M.C. to change the menu option
and press to select INITIAL.
Once selected, the initial menu function below
can be adjusted.
SP-P/O MODE (rear output and preout setting)
The rear speaker leads output and the RCA output
of this unit can be used to connect a full-range
speaker or subwoofer. Select a suitable option for
your connection.
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select the desired setting.
!
REAR/SUB.W
–
Select when there is a full-
range speaker connected to the rear speak-
er leads output and there is a subwoofer
connected to the RCA output.
!
SUB.W/SUB.W
–
Select when there is a
subwoofer connected directly to the rear
speaker leads output without any auxiliary
amp and there is a subwoofer connected
to the RCA output.
!
REAR/REAR
–
Select when there is a full-
range speaker connected to the rear speak-
er leads output and the RCA output.
If there is a full-range speaker connected to
the rear speaker leads output and the RCA
output is not used, you may select either
REAR/SUB.W
or
REAR/REAR
.
Using this unit
12
Section
Using this unit
En
02
<QRD3201-A>12