!
If you mute the selected speaker unit (fil-
ter),
MUTE ON
is displayed and no adjust-
ments are possible.
!
Even if any speaker unit (filter) is muted,
you can adjust the parameters for other
speaker units (filters).
1
Use MULTI-CONTROL to select
Front HPF (or Rear HPF).
Front HPF
(or
Rear HPF
) appears in the dis-
play.
2
Push and hold MULTI-CONTROL down
to mute the selected speaker unit (filter).
MUTE ON
is displayed.
#
To cancel the muting, push
MULTI-CONTROL
up.
Setting the high pass filter for
front speakers
1
Use MULTI-CONTROL to select
Front HPF.
Front HPF
appears in the display.
2
Push MULTI-CONTROL left or right to
select slope.
Each time
MULTI-CONTROL
is pushed left or
right, slopes are selected in the following
order:
–
12
—
–
6
—
Pass (0)
(dB/oct.)
#
If you set the slope to 0 dB/oct. (
Pass
), the
audio signal bypasses the filter, so the filter does
not have an effect.
3
Turn MULTI-CONTROL to select
Front HPF FREQ.
Front HPF FREQ.
appears in the display.
4
Push MULTI-CONTROL left or right to
select cut-off frequency.
Each time
MULTI-CONTROL
is pushed left or
right, cut-off frequencies are selected in the
following order:
50
—
63
—
80
—
100
—
125
—
160
—
200
(Hz)
Only frequencies higher than those in the se-
lected range are output from the front speak-
ers.
5
Push MULTI-CONTROL up or down to
adjust the output level of the front speak-
ers.
Each time
MULTI-CONTROL
is pushed up or
down, the level of the front speakers increases
or decreases.
0
to
–
24
is displayed as the level
is increased or decreased.
Setting the high pass filter for
rear speakers
1
Use MULTI-CONTROL to select
Rear HPF.
Rear HPF
appears in the display.
2
Push MULTI-CONTROL left or right to
select slope.
Each time
MULTI-CONTROL
is pushed left or
right, slopes are selected in the following
order:
–
12
—
–
6
—
Pass (0)
(dB/oct.)
#
If you set the slope to 0 dB/oct. (
Pass
), the
audio signal bypasses the filter, so the filter does
not have an effect.
3
Turn MULTI-CONTROL to select
Rear HPF FREQ.
Rear HPF FREQ.
appears in the display.
4
Push MULTI-CONTROL left or right to
select cut-off frequency.
Each time
MULTI-CONTROL
is pushed left or
right, cut-off frequencies are selected in the
following order:
50
—
63
—
80
—
100
—
125
—
160
—
200
(Hz)
Only frequencies higher than those in the se-
lected range are output from the rear speak-
ers.
Audio Adjustments
En
85
English
Section
14
Содержание DEH-P9800BT - Radio / CD
Страница 2: ...En 2 ...