Pioneer DEH-P9600MP, Руководство по обслуживанию

Страница: 65 / 96

DEH-P9600MP/XN/EW
65
5 6 7 8
5 6
7
8
C
D
F
A
B
E
-
Removing the Detach Grille Assy and Grille Assy
Remove the two screws. (Fig.4)
Remove the two screws and then
remove the Panel Unit. (Fig.5)
-
Removing the Panel Unit
1
1
*) When installing the screws, please make sure
that the spring is also installed.
Remove the two screws. (Fig.4)
2
1
2
Detach Grille Assy
Grille Assy
Gear
Spring
Disconnect the connector and then remove the
Detach Grille Assy.
Disconnect the connector and then remove the
Grille Assy.
Panel Unit
1 1
Fig.5
Fig.4
+ the other side
+ the other side
OPEN POSITION
EJECT POSITION
CLOSE POSITION
OPEN
CLOSE
Fig.3
Use the finger. Rotate the gear in the direction
indicated by arrow in Fig.3 until the Arm Unit
moves to the 3 positions of a Fig.3.
-
Moving the Arm Unit position (Fig.3)
Move the Arm Unit to the OPEN POSITION. (Fig.3)
Move the Arm Unit to the EJECT POSITION. (Fig.3)
Move the Arm Unit to the OPEN POSITION. (Fig.3)
*) There is a possibility of bending if load is
added to the arm parts, It becomes the
cause of defect of move of the grille parts.
When you place a product, please go in the
CLOSE POSITION.
Arm Unit