DEH-P940MP/UC
A
B
C
D
5
7
8
5
7
8
85
-
How to remove the CD Core Unit(S9MP3)
1. Give jumper-solder treatment to the Flexible Wire of
the Pickup unit, then remove the wire from the
Connector.
2. Remove all 4 points of solder-treatment on the Lead
Wire. Also, unscrew the screw(1 piece).
3. Then, Remove the CD Core Unit(S9MP3).
(Caution)
Be careful not to damage SW when you reassemble
the CD Core Unit(S9MP3) into the device.
-
How to remove the Loading Arm Assy
1. Unlock the spring (1 piece) and remove the E ring (1
piece) of the Fulcrum Shaft.
2. Shift the arm to the left side direction and unlock pins
(2 pieces).
-
How to remove the Pickup Unit
1. Unscrew 2 pieces of screws, then remove the Pulley
2. Remove the Feed Screw unit from the pawl of the
Feed Screw Guide (The pawl is located inside the
3. Remove the belt from the Pulley, then remove the
Make sure not to stain the belt with grease when you
CD Core Unit
(S9MP3)
Jumper-Solder
Solder
Loading Arm Assy
Pickup Unit
Pulley Cover
Feed Screw Guide
Belt
Grease Application
Grease Application
Grease Application
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299