Pioneer DEH-P8400MP, Руководство по эксплуатации

Страница: 19 / 124

04
Section
Built-in CD Player
En
19
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Playing a CD
These are the basic steps necessary to play a
CD with your built-in CD player. More advanced
CD operation is explained starting on page 20.
1
TRACK NUMBER
indicator
Shows the track currently playing.
2
PLAY TIME
indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press
EJECT.
CD loading slot appears.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
EJECT
button
• You can eject a CD by pressing
EJECT
.
• If the front panel is in the EJECT position
(shown above), buttons other than
EJECT ,
VOLUME
,
OPEN
, and
ATT
(on the remote con-
trol) do not operate.
3 After a CD has been inserted, press
SOURCE
to select the built-in CD player.
Press
SOURCE
until you see
Compact Disc
dis-
played.
4 Use
VOLUME
to adjust the sound level.
Rotate to increase or decrease the volume.
5 To perform fast forward or reverse, press
and hold
2
or
3
.
6 To skip back or forward to another track,
press
2
or
3
.
Pressing
3
skips to the start of the next track.
Pressing
2
once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
to eject the disc, and check the
disc for damage before inserting the disc
again.
•
5
and
∞
can be operated when MP3 or WMA
is playing.
• If the built-in CD player does not operate prop-
erly, an error message such as
ERROR-11
may
be displayed. Refer to Understanding built-in
CD player error messages on page 55.
2 1