
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off. When a sub-
woofer is connected to this unit, turn the sub-
woofer output on.
The subwoofer output phase can be switched
between normal and reverse.
1
Use MULTI-CONTROL to select
Subwoofer1.
Subwoofer1
appears in the display.
#
You can also select the subwoofer setting
menu by pressing
SW
on the unit.
2
Press MULTI-CONTROL to turn subwoo-
fer output on.
ON
appears in the display. Subwoofer output
is now on.
#
To turn subwoofer output off, press
MULTI-CONTROL
again.
3
Push MULTI-CONTROL left or right to
select stereo or monaural.
Push
MULTI-CONTROL
left to select monaural
and
MONO
appears in the display. Push
MULTI-CONTROL
right to select stereo and
STEREO
appears in the display.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
1
Use MULTI-CONTROL to select
Subwoofer2.
Subwoofer2
appears in the display.
#
You can also select the subwoofer setting
menu by pressing
SW
on the unit.
#
When the subwoofer output is on, you can se-
lect
Subwoofer2
.
2
Push MULTI-CONTROL left or right to
select cut-off frequency.
Each time
MULTI-CONTROL
is pushed left or
right, cut-off frequencies are selected in the
following order:
50
—
63
—
80
—
100
—
125
—
160
—
200
(Hz)
Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.
3
Push MULTI-CONTROL up or down to
adjust the output level of the subwoofer.
Each time
MULTI-CONTROL
is pushed up or
down, subwoofer level increases or decreases.
+6
to
–
24
is displayed as the level is increased
or decreased.
Adjusting low pass filter
attenuation slope
When the subwoofer output is on, you can ad-
just the continuity of sound between speaker
units.
1
Use MULTI-CONTROL to select
Subwoofer3.
Subwoofer3
appears in the display.
#
You can also select the subwoofer setting
menu by pressing
SW
on the unit.
#
When the subwoofer output is on, you can se-
lect
Subwoofer3
.
2
Push MULTI-CONTROL up or down to
select the phase of subwoofer output.
Push
MULTI-CONTROL
up to select normal
phase and
appears in the display. Push
MULTI-CONTROL
down to select reverse
phase and
appears in the display.
3
Push MULTI-CONTROL left or right to
select slope.
Each time
MULTI-CONTROL
is pushed left or
right, slopes are selected in the following
order:
–
18
—
–
12
—
–
6
(dB/oct.)
Audio Adjustments
En
58
Section
13