Resetting the microprocessor
The microprocessor must be reset under the
following conditions:
!
Prior to using this unit for the first time
after installation
!
If the unit fails to operate properly
!
When strange or incorrect messages ap-
pear on the display
%
Press RESET with a pen tip or other
pointed instrument.
RESET
button
Protecting your unit from
theft
The front panel can be detached from the
head unit and stored in the provided protective
case to prevent theft.
!
If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound and
the front panel will open.
!
You can turn off the warning tone. See
Switching the warning tone
on page 61.
!
You can turn off the face auto open. See
Switching the face auto open
on page 61.
Important
!
Never use force or grip the display and the
buttons too tightly when removing or attach-
ing.
!
Avoid subjecting the front panel to excessive
shocks.
!
Keep the front panel out of direct sunlight and
high temperatures.
!
A few seconds after turning the ignition
switch to on or off, the front panel automati-
cally moves. When this happens, your fingers
may become jammed in the panel, so keep
your hands away from it.
!
When removing the front panel, be sure to
hold the corrugated release button on the rear
of the front panel while pulling.
Removing the front panel
1 Press and hold EJECT to open the front
panel.
2 Press the release button, slide and re-
move the front panel toward you.
Take care not to grip it too tightly or to drop
the front panel and protect it from contact
with water or other fluids to prevent perma-
nent damage.
Release button
3Put the front panel into provided pro-
tective case for safe keeping.
Before You Start
En
8
Section
01
Содержание DEH-P6800MP
Страница 149: ...Fr 149 Français ...
Страница 150: ...Fr 150 ...
Страница 151: ...Fr 151 Français ...