!
For this function, verify the topic
Adjusting
initial settings
before initiating the opera-
tion.
1
Display the intial setting menu.
2
Use MULTI-CONTROL to select
Pin code input.
3
Push MULTI-CONTROL up or down to
select a number.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
5
After inputting PIN code (up to 16 di-
gits), press MULTI-CONTROL.
PIN code can be stored in memory.
When you press
MULTI-CONTROL
again on
the same display, the PIN code you entered is
stored in this unit.
#
Pushing
MULTI-CONTROL
right in the confir-
mation display returns you to the PIN code input
display, and you can change the PIN code.
Displaying system version
for repair
Should this unit fails to operate properly and
you consult your dealer for repair, you may be
asked to indicate the system versions of this
unit and of Bluetooth module. You can display
the versions and confirm them.
!
For this function, verify the topic
Adjusting
initial settings
before initiating the opera-
tion.
1
Display the intial setting menu.
2
Use MULTI-CONTROL to select
BT Version info.
The system (microprocessor) version of this
unit is displayed.
3
Push MULTI-CONTROL left to switch to
the version of the Bluetooth module of this
unit.
#
Pushing
MULTI-CONTROL
right returns to the
system version of this unit.
Initial Settings
En
34
Section
04
