Pioneer DEH-P600UB - Premier Radio / CD, Руководство по эксплуатации

Страница: 13 / 71

Tuner
Basic Operations
6
1 2 4 5 3
1
Band indicator
2
5
(stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
3
LOC indicator
Appears when local seek tuning is on.
4
Preset number indicator
5
Signal level indicator
Shows the radio wave strength.
6
Frequency indicator
%
Select a band
Press
BAND
.
#
Band can be selected from among FM1 , FM2 ,
FM3 or AM .
%
Manual tuning (step by step)
Push MULTI-CONTROL left or right.
%
Seek tuning
Push and hold
MULTI-CONTROL
left or right
for about one second and release.
#
You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
#
If you push and hold
MULTI-CONTROL
left or
right, you can skip stations. Seek tuning starts as
soon as you release
MULTI-CONTROL
.
Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
!
Six stations for each band can be stored in
memory.
1 Press LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL up or down.
#
To return to the ordinary display, press
BAND
or
LIST
.
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Using the remote control
%
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
#
You can also recall radio station frequencies
assigned to preset tuning numbers by pushing
MULTI-CONTROL up or down during the fre-
quency display.
Introduction of advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
Operating this unit
En
13
Section
02
Operating
this
unit