Black plate (34,1)
<XRD7106-A/N>34
Selecting bass frequency
You can select the bass frequency for level ad-
justment.
1 Press AUDIO and hold until frequency
and the Q factor (e.g., F 80 Q 1W) appears
in the display.
2 Press AUDIO to select Bass.
Press
AUDIO
until
Bass
appears in the dis-
play.
3 Press
c
or
d
to select the desired fre-
quency.
Press
c
or
d
until the desired frequency ap-
pears in the display.
40
63
100
160
(Hz)
Selecting treble frequency
You can select the treble frequency for level
adjustment.
1 Press AUDIO and hold until frequency
and the Q factor (e.g., F 80 Q 1W) appears
in the display.
2 Press AUDIO to select Treble.
Press
AUDIO
until
Treble
appears in the dis-
play.
3 Press
c
or
d
to select the desired fre-
quency.
Press
c
or
d
until the desired frequency ap-
pears in the display.
2.5k
4k
6.3k
10k
(Hz)
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select Loud.
Press
AUDIO
until
Loud
appears in the dis-
play.
2 Press
a
to turn loudness on.
Loudness level (e.g.,
Loud MID
) appears in
the display.
3 Press
c
or
d
to select a desired level.
Each press of
c
or
d
selects level in the fol-
lowing order:
LOW
(low)
MID
(mid)
HIGH
(high)
4 Press
b
to turn loudness off.
Loud OFF
appears in the display.
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
1 Press AUDIO to select Sub-W1.
Press
AUDIO
until
Sub-W1
appears in the dis-
play.
#
You can also select the subwoofer setting
menu by pressing
SW
on the unit.
#
When the subwoofer controller setting is
PREOUT:FULL
, you cannot select
Sub-W1
.
2 Press
a
to turn subwoofer output on.
Sub-W1 Normal
appears in the display. Sub-
woofer output is now on.
#
To turn subwoofer output off, press
b
.
3 Press
c
or
d
to select the phase of sub-
woofer output.
Press
c
to select reverse phase and
Rev.
ap-
pears in the display. Press
d
to select normal
phase and
Normal
appears in the display.
Audio Adjustments
En
34
Section
08
