03
Section
Tuner
En
11
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Listening to the radio
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 12.
1
BAND
indicator
Shows which band the radio is tuned to, AM
or FM.
2
FREQUENCY
indicator
Shows to which frequency the tuner is
tuned.
3
PRESET NUMBER
indicator
Shows what preset has been selected.
4
STEREO
(
) indicator
Shows that the frequency selected is being
broadcast in stereo.
1 Press
SOURCE
to select the tuner
.
2 Use
VOLUME
to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press
BAND/ESC
to select a band
.
Press
BAND/ESC
until the desired band is dis-
played,
F1
,
F2
,
F3
for FM or
AM
.
4 To perform manual tuning, press
2
or
3
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold
2
or
3
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
2
or
3
with a quick press.
• If you press and hold
2
or
3
you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Note
• When the frequency selected is being broad-
cast in stereo the
STEREO
(
)
indicator will
light.
3
1
4
2
