35
Audio Adjustment
Loudness Adjustment (LOUD)
The Loudness function compensates for deficiencies in the low and high sound ranges at
low volume. You can select a desired Loudness level.
1. Press the AUDIO button and select the Loudness mode (LOUD) in the Audio
Menu.
Subwoofer Output (SUB.W)
When a Subwoofer is connected, switch Subwoofer output ON.
Initially, Subwoofer output is ON.
The Subwoofer output phase can be switched between normal, or 0˚ (“NOR”), and reverse,
or 180˚(“REV”). 0˚ is the default phase.
Note:
• When the Subwoofer Controller setting is “S/W CTL:EXT”, you cannot switch the Subwoofer
ON/OFF mode. In this case, this setting is not necessary. (Refer to page 42.)
• Select the OFF setting when you do not want the Subwoofer to operate.
1. Press the AUDIO button and select the Subwoofer ON/OFF mode
(SUB.W) in the Audio Menu.
3. Change the phase of Subwoofer
output with the
2
/
3
buttons.
“SW”
2. Switch the Subwoofer output
ON/OFF with the
5
/
∞
buttons.
3. Select the desired level with
the
2
/
3
buttons.
LOW (low)
+=
MID (mid)
+=
HI (high)
“LOUD”
2. Switch the Loudness function
ON/OFF with the
5
/
∞
buttons.
