When not connecting a rear speaker leard to a subwoofer
33. Power amp
(sold separately)
12. Yellow
Connect to the constant 12 V supply terminal.
13. Red
Connect to terminal controlled by
ignition switch (12 V DC).
14. Orange/white
Connect to lighting switch terminal.
32. Connect with RCA cables
(sold separately)
36. Perform these
connections when using
the optional amplifier.
15. Black (chassis ground)
Connect to a clean, paint-free metal location.
2. This product
6. Subwoofer output
5. Antenna jack
4. Front output
11. Fuse (10 A)
35. System remote control
21.
Left
22.
Right
34. Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal
(max. 300 mA 12 V DC).
28. With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
20. Front speaker
27. Rear speaker
20. Front speaker
27. Rear speaker
20. Front speaker
27. Rear speaker
20. Front speaker
27. Rear speaker
16. White
18. Gray
19. Gray/black
17. White/black
23. Green
25. Violet
24. Green/black
26. Violet/black
3. Rear output
30. To front output
31. To subwoofer
output
29. To rear output
37.Subwoofer
37.Subwoofer
8. IP-BUS input (Blue)
9. IP-BUS cable
10. Multi-CD player
(sold separately)
1.5 m (4 ft. 9 in.)
1. USB cable
Connect to separately sold USB device.
7. Wired remote input
Hard-wired remote control adaptor can
be connected (sold separately).
20 cm
(7-7/8 in.)
33. Power amp
(sold separately)
33. Power amp
(sold separately)
When using a subwoofer without using the optional amplifier
21.
Left
22.
Right
20. Front speaker
20. Front speaker
16. White
18. Gray
19. Gray/black
17. White/black
23. Green
25. Violet
24. Green/black
26. Violet/black
39. Subwoofer (4
Ω
)
39. Subwoofer (4
Ω
)
40. When using a subwoofer of 70 W (2
Ω
), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
42. Subwoofer
(4
Ω
)
2
41. Not used.
38.
Note:
Change the initial setting of this unit.
The subwoofer output of this unit is monaural.
12. Yellow
Connect to the constant 12 V supply terminal.
13. Red
Connect to terminal controlled by ignition switch (12 V DC).
14. Orange/white
Connect to lighting switch terminal.
15. Black (chassis ground)
Connect to a clean, paint-free metal location.
34. Blue/white
Connect to system control
terminal of the power amp or
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
2. This product
6. Subwoofer output
5. Antenna jack
4. Front output
11. Fuse (10 A)
3. Rear output
8. IP-BUS input (Blue)
9. IP-BUS cable
10. Multi-CD player
(sold separately)
1. USB cable
Connect to separately sold USB device.
20 cm
(7-7/8 in.)
7. Wired remote input
Hard-wired remote control adaptor can
be connected (sold separately).
1.5 m (4 ft. 9 in.)
23. Green
25. Violet
24. Green/black
26. Violet/black
YRD5262AS̲inst.indd 13-16
YRD5262AS̲inst.indd 13-16
2008/07/24 14:20:23
2008/07/24 14:20:23