background image

Installation

English

Installation

English

 Note

•  Check all connections and systems before final 

installation.

•  Do not use unauthorized parts. The use of 

unauthorized parts may cause malfunctions.

•  Consult with your dealer if installation requires 

drilling of holes or other modifications of the 

vehicle.

•  Do not install this unit where:

—  it may interfere with operation of the vehicle.

—  it may cause injury to a passenger as a result 

of a sudden stop.

•  The semiconductor laser will be damaged if it 

overheats. Install this unit away from hot places 

such as near the heater outlet.

•  Optimum performance is obtained when the unit 

is installed at an angle of less than 60°.

60

°

DIN Front/Rear-mount

This unit can be properly installed either from  

“Front” (conventional DIN Front-mount) or 

“Rear” (DIN Rear-mount installation, utilizing 

threaded screw holes at the sides of unit 

chassis). For details, refer to the following 

installation methods.

DIN Front-mount

 Installation with metal strap and 

screws

1.  Insert the mounting sleeve into the 

dashboard.

•  When installing in a shallow space, use a 

supplied mounting sleeve. If there is enough 

space behind the unit, use factory supplied 

mounting sleeve.

2.  Secure the mounting sleeve by 

using a screwdriver to bend the 
metal tabs (90°) into place.

Dashboard

Mounting sleeve

53

182

3.  Install the unit.

•  Use commercially available parts when 

installing.

Screw (M4

˜

8)

Screw

Metal strap

Nut

Filrewall or  
metal support

•  Make sure that the unit is installed securely 

in place. Unstable installation may cause this 

unit to malfunction, such as sound skip.

Removing the Unit

1.  Extend top and bottom of the trim 

ring outwards to remove the trim 
ring. When reattaching the trim 
ring, push the trim ring onto the 
unit until it clicks. (If the trim ring 
is attached upside down, the trim 
ring will not fit properly.)

•  It becomes easy to remove the trim ring if the 

front panel is released.

Trim ring

2.  Insert the supplied extraction keys 

into both sides of the unit until 
they click into place.

3.  Pull the unit out of the dashboard.

DIN Rear-mount

1.  Extend top and bottom of the trim 

ring outwards to remove the trim 
ring. When reattaching the trim ring, 
push the trim ring onto the unit until 
it clicks. (If the trim ring is attached 
upside down, the trim ring will not 
fit properly.)

•  It becomes easy to remove the trim ring if the 

front panel is released.

Trim ring

2. Determine the appropriate position 

where the holes on the bracket and 
the side of the unit match.

3. Tighten two screws on each side.

•  Use either truss screws (5 mm × 8 mm) 

or flush surface screws (5 mm × 9 mm), 

depending on the shape of screw holes in the 

bracket.

Dashboard or Console

Factory radio mounting bracket

Screw

Fastening the front panel

If you do not plan to detach the front panel, 

the front panel can be fastened with supplied 

screw.

Screw

<KNANX>  <08H00000>

 Printed 

in 

China

 Imprimé 

en 

Chine

<YRD5262-A/S> UC

Installation Manual

Manuel d’installation

Manual de instalación

CD RECEIVER

AUTORADIO CD

RADIO CD

DEH-P4100UB

YRD5262AS̲inst.indd   1-4

YRD5262AS̲inst.indd   1-4

2008/07/24   14:20:21

2008/07/24   14:20:21

Содержание DEH P4100UB






Отзывы: