Playing a CD
3
2
1
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
page.
1
Disc number indicator
Shows the disc currently playing.
2
Play time indicator
Shows the elapsed playing time of the cur-
rent track.
3
Track number indicator
Shows the track currently playing.
1 Press SOURCE to select the multi-CD
player.
Press
SOURCE
until multi-CD is selected as
the source.
2 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3 Select a disc you want to listen to with
the 1
6 buttons.
For discs located at 1 to 6, press the corre-
sponding button number.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers,
such as
1
for disc 7, until the disc number ap-
pears in the display.
#
You can also sequentially select a disc by
pressing
a
/
b
.
4 To perform fast forward or reverse,
press and hold
c
or
d
.
5 To skip back or forward to another
track, press
c
or
d
.
Pressing
d
skips to the start of the next track.
Pressing
c
once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!
When the multi-CD player performs the pre-
paratory operations,
READY
is displayed.
!
If an error message such as
ERROR-11
is dis-
played, refer to the multi-CD player owner
s
manual.
!
If there are no discs in the multi-CD player ma-
gazine,
NO DISC
is displayed.
!
When you select a CD TEXT disc on a CD TEXT
compatible multi-CD player, the disc and track
titles begin to scroll to the left auto-
matically.
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
Multi-CD Player
En
24
Section
07