Listeningto the radio
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
This unit
s AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 12).
1
Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
2
Frequencyindicator
Shows to which frequency the tuner is
tuned.
3
Stereo (
5
) indicator
Shows that the frequency selected is being
broadcast in stereo.
4
Preset number indicator
Shows what preset has been selected.
1 Press SOURCE to select the tuner.
Press
SOURCE
until tuner is selected as the
source.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND to select a band.
Press
BAND
until the desired band is dis-
played,
F1
,
F2
,
F3
for FM or
MW/LW
.
4 To perform manual tuning, press
c
or
d
with quick presses.
The frequencies move up or down step by
step.
5 To perform seek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by pressing either
c
or
d
with a quick press.
#
If you press and hold
c
or
d
you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Note
When the frequency selected is being broadcast
in stereo the stereo (
5
) indicator will light.
Tuner
En
9
English
Section
04
Содержание DEH-P3600MP
Страница 95: ...Es 95 Español ...