Pioneer DEH-P2900MP, Руководство по эксплуатации

Страница: 24 / 94

#
When the rear output setting is
R-SP :S/W
,
you cannot operate the following procedure.
3 Press
c
or
d
to switch the subwoofer
output or rear output.
Pressing
c
or
d
will switch between
P/O :S/W
and P/O :FUL and that status will be displayed.
Notes
!
Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to
Using subwoofer output on page
21).
!
If you change this setting, subwoofer output
in the audio menu return to the factory
settings.
Turning the clock display
on or off
You can turn the clock display on or off.
%
Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
#
The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Note
Even when the sources are off, the clock display
appears on the display. Pressing
CLOCK turns
the clock display on or off.
Using the AUX source
This unit can control up to two auxiliary equip-
ments such as VCR or portable devices (sold
separately). When connected, auxiliary equip-
ments are automatically read in as AUX
sources and assigned to
AUX1 or AUX2 . The
relationship between AUX1 and AUX2
sources is explained below.
About AUX connection method
You have two methods to connect auxiliary
equipments to this unit.
Stereo mini pin plug cable ( AUX1 )
When connecting auxiliary equipment using a
stereo mini plug cable
%
Insert the stereo mini plug into the
AUX input jack on this unit.
IP-BUS-RCA interconnector ( AUX2 )
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
%
Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’
s manual.
#
You can only make this type of connection if
the auxiliary equipment has RCA outputs.
Selecting AUX as the source
%
Press SOURCE to select AUX (AUX1 or
AUX2) as the source.
Press
SOURCE
until
AUX
appears in the dis-
play.
#
If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on the previous page.
Introduction of iPod
®
operation
1 1 1
You can use this unit to control an iPod adapter,
which is sold separately.
Other Functions
En
24
Section
07