Pioneer DEH-7300BT, Руководство по эксплуатации

Страница: 17 / 28

This unit can display the text information of a com-
pressed audio file even if they are embedded in a
Western European or Russian language.
!
If the embedded language and the selected lan-
guage setting are not the same, text information
may not display properly.
!
Some characters may not be displayed properly.
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select the desired setting.
EUROPEAN (European)
—
RUSSIAN (Russian)
3
Press M.C. to confirm the selection.
PW SAVE (power saving)
Switching this function on enables you to reduce the
consumption of battery power.
!
Turning on the source is the only operation al-
lowed when this function is on.
1
Press M.C. to turn the power save on or off.
BT CLEAR (resetting the Bluetooth wireless technol-
ogy module)
Bluetooth telephone data can be deleted. To protect
personal information, we recommend deleting this
data before transferring the unit to other persons. The
following settings will be deleted.
!
phone book entries on the Bluetooth telephone
!
preset numbers on the Bluetooth telephone
!
registration assignment of the Bluetooth tele-
phone
!
call history of the Bluetooth telephone
!
information of the connected Bluetooth telephone
1
Press M.C. to show the confirmation display.
YES is displayed. Clearing memory is now on
standby.
If you do not want to reset phone memory, press
. The display reverts.
2
Press M.C. to clear the memory.
CLEARED
is displayed and the settings are de-
leted.
!
While this function is in use, do not turn off
the engine.
VER INFO (Bluetooth version display)
You can display the system versions of this unit and
of Bluetooth module.
1
Press M.C. to display the information.
S/W UPDATE
(updating the software)
This function is used to update this unit with the lat-
est software. For information on the software and up-
dating, refer to our website.
!
Never turn the unit off while the software is being
updated.
1
Press M.C. to display the data transfer mode.
Follow the on-screen instructions to finish updat-
ing the software.
Using an AUX source
1 Insert the stereo mini plug into the
AUX input jack.
2 Press S (SRC/OFF) to select AUX as the
source.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to
AUX
(auxiliary input) on the previous page.
En
17
Section
02
Operating
this
unit
Operating this unit