Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
Press SRC/OFF and hold until the unit
turns off.
2
Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3
Turn MULTI-CONTROL to select one of
the initial settings.
LANGUAGE
(language selection)
—
CALENDAR
(calendar)
—
CLOCK
(clock)
—
WARNING
(warning tone)
—
AUX1
(auxiliary
input 1)
—
AUX2
(auxiliary input 2)
—
REAR SP
(rear output and subwoofer output)
—
AMP
(power amp setting)
—
EVERSCROLL
(ever
scroll)
—
BT AUDIO
(Bluetooth audio)
—
BT MEMORY CLR
(clearing Bluetooth mem-
ory)
—
S/W UPDATE
(software update)
Use the following instructions to operate each
particular setting.
#
To cancel initial settings, press
BAND/ESC
.
Selecting the language
For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on this page.
2
Use MULTI-CONTROL to select
LANGUAGE in the initial setting menu.
3
Push MULTI-CONTROL left or right to
select the language.
ENG
(English)
—
ESPAÑOL
(Spanish)
4
Press MULTI-CONTROL to determine
the selection.
Setting the date
The calendar display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on this page.
2
Use MULTI-CONTROL to select
CALENDAR in the initial setting menu.
3
Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing
MULTI-CONTROL
left or right will se-
lect one segment of the calendar display:
Day
—
Month
As you select segments of the calendar dis-
play the segment selected will blink.
4
Push MULTI-CONTROL up or down to
set the date.
Pushing
MULTI-CONTROL
up will increase
the selected day or month. Pushing
MULTI-CONTROL
down will decrease the se-
lected day or month.
Setting the clock
Use these instructions to set the clock.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on this page.
2
Use MULTI-CONTROL to select CLOCK in
the initial setting menu.
3
Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing
MULTI-CONTROL
left or right will se-
lect one segment of the clock display:
Hour
—
Minute
As you select segments of the clock display,
the selected segment blinks.
#
You can match the clock to a time signal by
pressing
MULTI-CONTROL
.
Initial Settings
En
42
Section
10