!
If you do not operate functions except for
Open device
,
SEARCH DEVICE
,
DISCONNECT
,
DEVICE EDIT
and
PINCODE INPUT
within about 30 seconds, the
display automatically returns to the ordinary
display.
!
If you do not operate
OPEN DEVICE
and
SEARCH DEVICE
within 30 seconds after the
Bluetooth device is paired, the display auto-
matically returns to the ordinary display.
Using a Bluetooth device to pair
1
Display the connection menu.
Refer to
Introduction to connection operations
on the previous page.
2
Use MULTI-CONTROL to select
OPEN DEVICE.
#
If there is previous connection log in this unit,
you can select the Bluetooth device from
PAIRED DEVICE
.
Refer to
Connecting a paired Bluetooth device and
selecting a service
on the next page.
3
Push MULTI-CONTROL up or down to
select the special device.
#
Bluetooth devices that are difficult to establish
connection is called special device. If your Blue-
tooth device is listed in the special device, select
the appropriate one.
4
Press MULTI-CONTROL to open the con-
nection.
READY
will be displayed.
This unit is now on standby for connection
from Bluetooth device.
#
If five devices are already paired,
MEMORY FULL
is displayed and it is not possible
to perform the pairing operation. In this case, de-
lete a paired device first. Refer to
Deleting a paired
Bluetooth device
on the next page.
#
Push
MULTI-CONTROL
left or right to display
the device name, BD address and PIN code of
this unit.
5
Use your Bluetooth device to establish
connection.
Connection method is different depending on
the Bluetooth device. See the manual of your
Bluetooth device to establish connection.
When the connection is established,
PAIRED
is displayed.
#
If the connection fails,
ERROR
is displayed. In
this case, try again from the beginning.
#
PIN code is set to
0000
as the default. You
can change this code in the initial setting. Refer
to
Entering PIN code for Bluetooth wireless con-
nection
on page 31.
Pairing from this unit
1
Display the connection menu.
Refer to
Introduction to connection operations
on the previous page.
2
Use MULTI-CONTROL to select
SEARCH DEVICE.
3
Push MULTI-CONTROL up or down to
select a device.
4
Press MULTI-CONTROL to start search-
ing.
While searching,
SEARCHING
flashes. When
available Bluetooth devices are found, device
name or BD address (if names cannot be ob-
tained) is displayed.
#
To cancel searching, press
MULTI-CONTROL
again.
#
If five devices are already paired,
MEMORY FULL
is displayed and it is not possible
to perform the pairing operation. In this case, de-
lete a paired device first. Refer to
Deleting a paired
Bluetooth device
on the next page.
#
If no device can be found,
NOT FOUND
is dis-
played. In this case, check the status of Bluetooth
device and search again.
5
Push MULTI-CONTROL up or down to
select a device name you want to connect.
#
If only one device was found, this step cannot
be performed.
Using Bluetooth wireless technology
En
28
Section
08