Pioneer DEH-4600BT, Руководство по эксплуатации

Страница: 6 / 36

Storing and recalling stations
for each band
Using preset tuning buttons
1 To store: Press and hold down one of
the preset tuning buttons (1/ to 6/ )
until the number stops flashing.
2 To recall: Press one of the preset tuning
buttons (1/ to 6/ ).
Switching the display
Selecting the desired text information
1
Press DISP to cycle between the following:
!
FREQUENCY
(program service name or fre-
quency)
!
BRDCST INFO
(program service name/PTY in-
formation)
!
CLOCK (source name and clock)
Notes
!
If the program service name cannot be ac-
quired in
FREQUENCY , the broadcast fre-
quency is displayed instead. If the program
service name is detected, the program service
name will be displayed.
!
Depending on the band, text information can
be changed.
!
Text information items that can be changed
depend on the area.
Using PTY functions
You can tune in to a station using PTY (pro-
gram type) information.
Searching for an RDS station by PTY information
1
Press (list).
2
Turn M.C. to select a program type.
NEWS/INFO
—
POPULAR
—
CLASSICS
—
OTHERS
3
Press M.C. to begin the search.
The unit searches for a station broadcasting that
type of program. When a station is found, its pro-
gram service name is displayed.
!
To cancel the search, press M.C. again.
!
The program of some stations may differ from
that indicated by the transmitted PTY.
!
If no station is broadcasting the type of pro-
gram you searched for,
NOT FOUND is dis-
played for about two seconds and then the
tuner returns to the original station.
PTY list
For more details about PTY list, visit the follow-
ing site:
http://www.pioneer.eu/eur/products/25/121/
tech/CarAudio/PTY.html
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
#
If MW/LW band is selected, only BSM , LOCAL
and
SEEK
are available.
FM SETTING (FM sound quality settings)
The sound quality level can be set to match the broad-
cast signal conditions of the FM band signal.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
!
STANDARD
–
This is the standard setting.
!
HI-FI
–
This is the setting to use to prioritize
the high quality of stereo sound.
!
STABLE
–
This is the setting to use to prioritize
the low noise of monaural sound.
BSM
(best stations memory)
En
6
Section
02
Using this unit