Pioneer DEH-4090MP, Руководство пользователя, Страница: 9 / 34

Basic Operations
Power ON/OFF
Turning the unit on
%
Press SRC to turn the unit on.
Turning the unit off
%
Press OFF and hold until the unit turns
off.
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 11).
%
Press SRC repeatedly to switch be-
tween the following sources.
TUNER
(tuner)
—
COMPACT DISC (built-in CD
player)
—
AUX (AUX)
Notes
!
In the following cases, the sound source will
not change.
—
When there is no disc in the unit.
—
When AUX (auxiliary input) is set to off
(refer to page 20).
!
AUX is set to on by default. Turn off the AUX
when not in use (refer to
Switching the auxili-
ary setting on page 20).
!
Charging the portable audio player using
car
’
s DC power source while connecting it to
AUX input may generate noise. In this case,
stop charging.
!
When this unit
’
s blue/white lead is connected
to the vehicle
’
s auto-antenna relay control
terminal, the vehicle
’
s antenna extends when
this unit
’
s source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%
Use MULTI-CONTROL to adjust the
sound level.
Tuner
Basic Operations
%
Select a band
Press BAND/ESC .
#
Band can be selected from among FM1 , FM2 ,
FM3 or AM .
%
Manual tuning (step by step)
Push MULTI-CONTROL left or right.
%
Seek tuning
Push and hold MULTI-CONTROL left or right
for about one second and release.
#
You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
#
If you push and hold
MULTI-CONTROL
left or
right, you can skip stations. Seek tuning starts as
soon as you release
MULTI-CONTROL .
Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
!
Six stations for each band can be stored in
memory.
1 Press LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
#
You can also store the frequency in memory
by pushing and holding MULTI-CONTROL right.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
To return to the ordinary display, press
BAND/ESC or LIST .
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Operating this unit
En
9
Section
02
Operating
this
unit