2 Press 4 repeatedly to turn random play
on or off.
When random play is on,
RDM
appears in the
display.
#
If you turn random play on during
FRPT
,
FRDM
appears in the display.
Scanning tracks or folders of a disc
Scan play lets you hear the first 10 seconds of
each track on the CD.
For MP3/WMA/WAV playback, scan play com-
mences within the selected repeat range,
FRPT
(folder repeat) and disc repeat.
1 When playing an MP3/WMA/WAV disc,
select the repeat range.
Refer to
Repeating play
on the previous page.
2 Press 3 to turn scan play on.
SCAN
appears in the display. The first 10 sec-
onds of each track is played.
#
If you turn scan play on during
FRPT
,
FSCN
appears in the display.
3 When you find the desired trackpress 3
to turn scan play off.
#
After scanning of a disc (folder) is finished,
normal playback of the tracks will begin again.
Pausing disc playback
Pause lets you temporarily stop playback of
the disc.
%
Press 6 repeatedly to turn pause on or
off.
When pause is on,
PAUSE
appears in the dis-
play.
Searching every 10 tracks in the
current disc or folder
You can switch the search method between
fast forward/reverse and searching every 10
tracks. Selecting
ROUGH
enables you to
search every 10 tracks.
1 Press 2 to select the search method.
Press
2
until the desired search method ap-
pears in the display.
!
FF/REV
Fast forward and reverse
!
ROUGH
Searching every 10 tracks
2 Select the search method ROUGH.
3 Press and hold
c
or
d
to search every
10 tracks on a disc (folder).
#
If a disc (folder) contains less than 10 tracks,
pressing and holding
c
(
d
) recalls the first (last)
track of the disc (folder). Also, if the remaining
number of tracks after searching every 10 tracks
is less than 10, pressing and holding
c
(
d
) re-
calls the first (last) track of the disc (folder).
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions has
a two-step adjustment. The COMP function
balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
%
Press 1 to select your favorite setting.
Press
1
repeatedly to switch between the fol-
lowing settings:
COMP OFF
COMP 1
COMP 2
COMP OFF
BMX 1
BMX 2
Operating this unit
En
12
Section
03