En
9
Built-in CD player
Playing a CD
1
TRACK NUMBER
indicator
Shows the track currently playing.
2
PLAY TIME
indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press
OPEN
to open the front panel.
CD loading slot appears.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
CD EJECT
button
• You can eject a CD by pressing
CD EJECT
.
3 Close the front panel.
• After a CD has been inserted, press
SOURCE
to select the built-in CD player.
4 Use
VOLUME
to adjust the sound level.
Rotate to increase or decrease the volume.
5 To perform fast forward or reverse, press
and hold
2
or
3
.
6 To skip back or forward to another track,
press
2
or
3
.
Pressing
3
skips to the start of the next track.
Pressing
2
once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
CD EJECT
to eject the disc, and check
the disc for damage before inserting the disc
again.
• If the built-in CD player does not operate prop-
erly, an error message such as
ERROR-14
may
be displayed. Refer to
Understanding built-in
CD player error messages
on page 16.
1
2
