Pioneer DEH-2200UB Скачать руководство пользователя страница 23

Страница: 23 / 75

DEH-2200UB/XSEW5

(3) USB-RELATED ERROR CODES

16
(*1)

Device

iPod authentication error Authentication of iPod failed

--> After a reattempt of iPod authentication, an error was returned from the iPod machine

and authentication IC.

Device

Unsupported device

Connection of a device not supported was detected.
--> A device other than a mass-storage device and iPod is connected.
--> An iPod of a generation earlier than 5G/nano is connected. Or, an iPod (even one of a

generation after 5G/nano) with the firmware that does not support digital streaming is

connected.

Device

All DRM

*Error code only for models that support iPod.

Note: Whether power supply failed or not can be judged from just the error mode (0xFA). (Referring to the error code [0xA1] is not necessary.)

Device

File Format NG

Data are written in file format not supported.
--> A format other than FAT is used.

Device

Playback unavailable

Playable file (MP3/WMA/AAC/WAV) not found
--> No playable file (MP3/WMA/AAC/WAV) exists in the device set.

Device

Communication error

Communication with a device failed.
--> Communication failed because of a defective device, etc.

(4) LIST OF ERROR CODES (Error Mode: 0xFA) Only for USB

System

Failure in power supply

Excess current detected in the USB bus.
--> Electric current exceeding the specified 500 mA flowed in the USB bus.

The bus power is shut off and the unit is stopped in response to an error.

For restoration, turn the unit OFF then back ON again

Note: Whether power supply failed or not can be judged from just the error mode (0xFB). (Referring to the error code [0xA0] is not necessary.)

(5) LIST OF ERROR CODES (Error Mode: 0xFB) Only for CD

System

Failure in power supply

A voltage or ground short was generated in the VD power.
--> Defective SW transistor; Failure in the power supply unit (defective connector);

Ejection is not possible; Restoration is only possible by turning the unit OFF then

back ON again.

•  The 2 high-order digits of an error code denote the main
  classification, shown below.
  1x: Setup-related errors
  2x: Errors related to TOC reading
  3x: Search-related errors
4x:

Playback-related

errors

5x:

Loading-ejection-related

errors

Ax: Other type of errors

•  How to restore from each error is shown below.
  1x, 2x, 3x, and 4x: ACC-OFF then ON, CD-OFF then ON,

Disc ejection, DKSTOP then DKPLAY

5X: ACC-OFF then ON, Disc ejection, Disc reloading,

Disc

removal

Ax:

ACC-OFF

then

NOTES

• The 2 high-order digits of an error code denote the main
  classification, shown below.
  1x: Setup-related errors
  2x: Errors related to file-system reading
  Ax: Other type of errors

• How to restore from each error is shown below.
1x: ACC-OFF then ON, USB-OFF then ON, Device removal,

DKSTOP then DKPLAY

2X: ACC-OFF then ON, USB-OFF then ON, Device removal,

DKSTOP then DKPLAY

Ax: ACC-OFF then ON

(6) ACTIONS OF CD/USB DURING ERROR

Mode

Error code

CD action

USB action

Mode

Error code