Receiving traffic announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other network
’
s TP station (a station
carrying information which cross-references
TP stations).
1
Tune in a TP or enhanced other net-
work
’
s TP station.
TP
indicator will light.
2
Press TA to turn traffic announcement
standby on.
#
To turn traffic announcements standby off,
press
TA
again.
3
Use VOLUME to adjust the TA volume
when a traffic announcement begins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4
Press TA while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until
TA
is pressed
again.
Notes
!
You can also turn the TA function on or off in
the menu that appears with the pressing of
FUNCTION
.
!
The system switches back to the original
source following traffic announcement recep-
tion.
!
Only TP and enhanced other network
’
s TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.
Built-in Player
Playing a disc
1
Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
#
Be sure to turn up the label side of a disc.
#
After a CD (CD-ROM) has been inserted, press
SOURCE
to select the built-in CD player.
#
You can eject a CD (CD-ROM) by pressing
EJECT
.
2
Press
a
or
b
to select a folder when
playing a compressed audio.
#
You cannot select a folder that does not have
a compressed audio file recorded in it.
#
To return to folder 01 (ROOT), press and hold
BAND
. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
3
To perform fast forward or reverse,
press and hold
c
or
d
.
#
If you select
ROUGH
, pressing and holding
c
or
d
enables you to search every 10 tracks in the
current disc (folder). (Refer to
Searching every 10
tracks in the current disc or folder
on page 11.)
4
To skip back or forward to another
track, press
c
or
d
.
Notes
!
Read the precautions with discs and player on
page 14.
!
If an error message such as
ERROR-11
is dis-
played, refer to
Error messages
on page 14.
!
There is sometimes a delay between starting
up disc playback and the sound being issued.
When being read,
FRMTREAD
is displayed.
!
When playing CD-EXTRA or MIXED-MODE
CDs, compressed audio and CD-DA can be
switched by pressing
BAND
.
!
If you have switched between compressed
audio and CD-DA, playback starts at the first
track on the disc.
!
The built-in CD player can play back com-
pressed audio recorded on CD-ROM. (Refer to
page 15 for files that can be played back.)
Operating this unit
En
9
English
Section
02
