En
10
Mixer section
c
d
e
f
b
1
2
5
3
6
9
8
7
1
2
5
3
6
7
4
4
a
1
INPUT SELECT switch
Selects the input source of each channel from the components con-
nected to this unit.
!
[
DECK1-4
]: Select this to use the track loaded in the rekordbox
deck.
!
[
PHONO/LINE
]: Select this to use a line level output device (DJ
player, etc.) connected to the [
PHONO/LINE
] input terminals on
the rear panel.
2
TRIM control
Adjusts the individual channel output gain.
3
EQ (HI, MID, LOW) controls
Boosts or cuts frequencies for the different channels.
4
Channel Level Indicator
Displays the sound level of the respective channels before passing
through the channel faders.
5
FILTER control
Applies the filter effect for the respective channel.
The original sound is output when the control is at the center
position.
Turn counterclockwise: Gradually descends the low-pass filter’s cut-
off frequency.
Turn clockwise: Gradually rises the high-pass filter’s cutoff
frequency.
6
Headphones CUE button
Press:
The sound of channels for which the headphones [
CUE
] button is
pressed is output to the headphones.
!
When the headphones [
CUE
] button is pressed again, monitor
output is canceled.
[
SHIFT
] + press:
The track’s tempo can be set by tapping the button. (Tap function)
7
Channel fader
Move:
Adjusts the level of audio signals output in each channel.
[
SHIFT
] + move:
Use the channel fader start function.
=
Using the channel fader start function
(p. 23 )
8
Crossfader
Outputs the sound assigned with the crossfader assign switch.
[
SHIFT
] + move:
Uses the crossfader start function.
=
Using the crossfader start function
(p. 23 )
9
MASTER LEVEL control
Adjusts the master sound level output.
a
Master level indicator
Displays the master output’s audio level.
b
Booth monitor level control
Adjusts the audio level output from the [
BOOTH
] output terminal.
c
HEADPHONES MIXING control
Adjusts the balance of the monitor volume between the sound of the
channels for which the headphones [
CUE
] button is pressed and the
sound of the master channel.
d
SAMPLER SYNC button
Synchronizes the sampler deck’s tempo with the master
deck’s tempo.
!
Only a sampler slot with the PLAY mode set to [
Loop
] synchro-
nizes the tempo with the master deck’s tempo.
[
SHIFT
] + press:
Sets the sampler deck as the master for synchronization.
e
SAMPLER CUE button
Turns monitoring of the sampler deck’s sound on or off.
[
SHIFT
] + press:
Sets the sampler deck’s tempo by tapping the button.
!
Only a sampler slot with the PLAY mode set to [
Loop
] will be the
same tempo as the BPM value on the sampler panel.
f
SAMPLER VOLUME control
Adjusts the sampler’s overall sound level.
