Controlling the rest of your system
03
17
En
English
3
Press the input function button of the
component for which you want to check the
preset code, then press ENTER.
The brand name and preset code appears in
the display for three seconds.
Renaming input function names
manually
You can customize the names that appear on
the remote display when you select an input
function (for example, you could change the
name of
DVR/BDR
to
DVR-LX61
).
1
While pressing MULTI OPERATION, press
HOME MENU.
The remote display shows
SETUP MENU
.
2
Use
/
to select ‘RENAME’, then press
ENTER.
The remote display prompts you for the button
of the input function you want to rename.
3
Press the input function button you want
to rename then press ENTER.
1
4
Use
/
to select ‘NAME EDIT’, then
press ENTER.
To reset the button to its original (default)
name, select
NAME RESET
above.
5
Edit the name of the input function in the
remote control display, pressing ENTER when
you’re finished.
Use
/
to change the character and
/
to move forward/back a position. The name can
be up to 14 characters.
Direct function
• Default setting:
ON
You can use the direct function feature to
control one component using the remote
control while at the same time, using your
receiver to playback a different component.
This could let you, for example, use the remote
control to set up and listen to a CD on the
receiver, and then use the remote control to
rewind a tape in your VCR while you continue
to listen to your CD player.
When direct function is on, any component you
select (using the input function buttons) will be
selected by both the receiver and the remote
control. When you turn direct function off, you
can operate the remote control without
affecting the receiver.
1
While pressing MULTI OPERATION, press
HOME MENU.
The remote display shows
SETUP MENU
.
2
Use
/
to select ‘DIRECT FUNC’, then
press ENTER.
The remote display prompts you for the button
of the input function you want to control.
3
Press the input function button for the
component you want to control, then press
ENTER.
2
4
Use
/
to switch direct function ON or
OFF, then press ENTER.
The remote display shows
OK
to confirm the
setting.
Multi Operation and System Off
The Multi Operation feature allows you to
program a series of up to 6 commands for the
components in your system. For example, you
could turn on your TV, turn on your DVD player
and start playing the loaded DVD using only
two buttons on the remote control.
Note
1 The
TV CONTROL
name can be changed when the remote control operation selector switch is switched to
TV
. To
change the names of the input functions, set the remote control operation selector switch to
SOURCE
.
2 You can’t use direct function
TUNER
,
HMG NET RADIO
,
ADAPTER PORT
and
iPod USB
.
CU-RF100.book Page 17 Wednesday, March 17, 2010 6:13 PM
