Pioneer CDX-MG6047ZH Скачать руководство пользователя страница 2

Страница: 2 / 70

CDX-MG6047ZH/UC

SAFETY INFORMATION

CAUTION

This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely

complex products such as those covered by this manual.

Improperly performed repairs can adversely affect the safety and reliability of the product and may void the

If you are not qualified to perform the repair of this product properly and safely, you should not risk

and refer the repair to a qualified service technician.

WARNING

This product contains lead in solder and certain electrical parts contain chemicals which are known to the

of California to cause cancer, birth defects or other reproductive harm.

Health & Safety Code Section 25249.6 - Proposition 65

repair

warranty.
trying to do so

state

Service Precaution

1. You should conform to the regulations governing the

product (safety, radio and noise, and other regulations),

and should keep the safety during servicing by following

the safety instructions described in this manual.

2. Never attempt to turn on this unit when the CD drive

mechanism is upside down. Doing so could cause

damage or malfunction to the drive mechanism.

3. For pickup unit(CXX1311) handling, please refer

to"Disassembly"(see page 58).

During replacement, handling precautions shall be

taken to prevent an electrostatic discharge(protection

by a short pin).

4. During disassembly, be sure to turn the power off

since an internal IC might be destroyed when a con-

nector is plugged or unplugged.

5. Please checking the grating after changing the ser-

vice pickup unit(see page 56).

Содержание CDX-MG6047ZH







































































Результаты поиска

Содержание CDX-MG6047ZH

Отзывы:

Похожие инструкции для CDX-MG6047ZH

Бренды по названию

Популярные бренды

Pioneer CDX-MG6047ZH, Руководство по обслуживанию

Результаты поиска

Содержание CDX-MG6047ZH

Отзывы:

Похожие инструкции для CDX-MG6047ZH

Бренды по названию

Популярные бренды