Pioneer CDJ-850, Руководство по обслуживанию

Страница: 39 / 122

39
CDJ- 8 50
5 6 7 8
5 6 7 8
A
B
C
D
E
F
[4] The list of error display
Time display shows "E-XXXX".
Main Sub Error Type Error Content Medium
E-6002 The program cannot be written in the DSP.
E-7024
Updating failed.
E-7201 TOC data cannot be read. 26
—
—
—
—
—
—
—
—
—
—
E-8301
Focus servo cannot be closed.
The pickup cannot be returned to the inner track of the disc.
The desired address could not be searched for.
The address could not be read.
22
91
E-8302
12
15
E-8303 Writing of music data in the buffer failed. 99
90
E-8304
Although compressed music data files (MP3/AAC) are supported by this unit, a data or
decoding (decompression) error was generated.
DSP PROGRAM
E-8305
Although the filename extension of the music file (MP3/AAC/WA V /AIFF) is proper, the format
of descriptions in the file is not supported.
Updating error
E-8306
Although the piece of music had once been registered in the library (database) or a playlist, etc.,
that piece had been erased from the USB storage device as of time of playback.
TOC READ ERROR CD
CD
CD
CD
CD
CD
CD
CD
CD
USB
USB
E-8307 Writing to the USB storage device failed.
PLAYER ERROR
E-8709 Communication between the panel CPU and the main CPU failed.
E-9101 A mechanical error (timeout) was generated during loading/unloading of a disc.
PLAYER ERROR
(Playback error)
Buffer write error
Decoding error
Format error
N o music file
USB writing error
COMMU N ICATIO N ERROR
LOADI N G TIMEOUT
[3] Display of various information
How to Enter Service Modes
1) V ersion/error history
The V ersion Display mode is entered after the RELOOP key is held pressed for at least 10 sec.
To change screens between V ersion Display and Error History, press the V I N YL MODE key while the V ersion Display
screen is displayed.
The error log screens will be changed if you press the CALL (LEFT) or CALL (RIGHT) key while the error history is
displayed.
2) Panel diagnosis/JOG load measurement (Panel microcomputer function)
To enter this mode, set the POWER switch to O N while holding the BACK and TEMPO keys pressed.
To enter JOG Load Measurement mode, set the TOUCH/RELEASE volume to the + (MAX) position during Service mode.
3) CD drive diagnosis mode
To enter CD Drive Diagnosis mode, set the POWER switch to O N while pressing the TIME and CD SELECT keys pressed.
Set the POWER switch to OFF to quit this mode.
4) Firmware Updating (USB media/program area)
To enter this mode, set the POWER switch to O N while pressing the USB SELECT and RELOOP keys pressed.
After updating is completed, set the POWER switch to OFF to quit this mode.
5) Firmware Updating (CDROM media/program area)
To enter this mode, set the POWER switch to O N while pressing the CD SELECT and RELOOP keys pressed.
After updating is completed, set the POWER switch to OFF to quit this mode.
6) Factory reset
To enter this mode, set the POWER switch to O N while holding the BACK and USB SELECT keys pressed.
For details on items to be factory-reset, see “8.2 USER SETTABLE ITEMS.”