Pioneer CDJ-850, Руководство по обслуживанию

Страница: 36 / 122

36
CDJ- 8 50
1 2 3 4
A
B
C
D
E
F
1 2 3 4
6.3 DETAILS ON SERVICE MODE
[1] Confirmation of the button input and an indication function
When it spends a power supply while pushing a TEMPO button and a BACK button simultaneously, It is displayed in the
BROWSE_FL, "SER
V ICE MODE", and enters into this mode.
When it enters this mode, the TAG-TRACK button is pushed, and the screen is sent as follows, the following status displays
are done.
In this mode, the input of each button, JOG, volume, etc. is normal, and it can check that a display can also be performed
normally. In addition, indication turns on while I push a button.
Caution: In this status display, if a V I N YL SPEED ADJUST V OLUME is turned to the limit of the right, it will shift to "the load
measurement mode of JOG." (Refer to the following clause. )
BUTTO N : The pushed button name is displayed.
JOG (*) : The point moves according to the direction that JOG turned.
E N CODER (*) : The point moves according to the direction that E N CODER
switch turned.
JOG V OLUME (*) : If a V I N YL SPEED ADJUST V OLUME is turned to the right,
a bar display will increase.
TEMPO SLIDER V OLUME : If a TEMPO slider knob is moved to the - side, a bar
display will increase.
*: JOG, E N CODER, V OLUME
Display the data for the touched controls in the third line.
At the JOG rotation
At the encoder rotation
At the TOUCH/RELEASE V OLUME rotation