21
En
03
5
Select and set the HDMI High-Speed Transmission setting.
Use
/
to select, then press
ENTER
.
• When
HDMI High-Speed Transmission
is set to
On
, use a High
Speed HDMI™ cable. The picture and sound may not be output
properly if any other HDMI cable (standard HDMI™ cable) is
used.
• When
HDMI
is selected for
Video
, proceed to step 8.
• When
Component Video
is selected for
Video
, proceed to
step 6.
• When
S-Video/Video
is selected for
Video
, proceed to step 7.
6
Select the output video resolution from the COMPONENT
VIDEO output terminals.
Use
/
to select, then press
ENTER
.
For details on the resolution settings, see
Switching the output video
resolution
on page 24.
7
Select the aspect ratio of your TV.
Use
/
to select, then press
ENTER
.
8
Check the settings.
Select
Proceed
, then press
ENTER
.
9
Output test tones.
Use
/
to select
Yes
, then press
ENTER
.
Caution
• The screen in step 10 and test tones are output simultaneously
according to the settings in steps 4 to 7. Lower the volume of the
devices connected with the player.
10 Finish the Setup Navigator menu.
Use
/
to select
Finish
, then press
ENTER
.
To redo the settings from the start, select
Go Back
.
Depending on the output terminal setting of step 4 or the HDMI
cable being used, it may happen that no picture and/or sound is
output. If this happens, the setup returns to step 4 if there is no
operation for over 30 seconds. Once the setup returns to step 4, redo
the settings according to the connected devices and the HDMI
cable being used.
TOP MENU
TOOLS
HOME
MENU
RETURN
ENTER
Setup Navigator
BD PLAYER
Select the HDMI Hi-speed transmission setting.
Normally select [On] (Recommended).
Select [Off] if the video or audio of HDMI-connected
was not output in the test output.
On
Off
Setup Navigator
BD PLAYER
Select the output video resolution at the
Component video terminal.
If you select [Source Direct], the output
resolution is determined according to the
video format of the playing source.
Setup Navigator
BD PLAYER
Select the screen aspect ratio to match
your TV.
Setup Navigator
BD PLAYER
Select [Proceed] if you want to start testing
your audio and video settings.
Procee
d
Setup Navigator
BD PLAYER
The test tone will be output.
Reduce the volume to an appropriate level.
The video and/or audio may not be output under certain setup.
The setup menu comes back in 30 seconds.
Yes
No
Setup Navigator
BD PLAYER
Setup is complete!
The setup menu comes back in 30 seconds.
Finish
Go Back
LX08_WV_EN.book 21 ページ ２００８年７月１５日 火曜日 午後２時５１分
