Pioneer BDP-440, Руководство по эксплуатации

Страница: 43 / 136

43
En
07
HDM
I
HDMI Mode (BDP-53FD) Single Select this when an HDMI cable is connected to HDMI OUT (MAIN) terminal only.
Separate Select this when HDMI cables are connected to both HDMI OUT terminals.
Pure Audio Select this to enjoy music only with a better sound quality when devices are
connected to both HDMI output terminals. With this setting, music is output
from the
HDMI OUT (SUB) terminal only, and video signals are only output
from the HDMI OUT (MAIN) terminal when DISPLAY is pressed.
Also refer to Setting the HDMI Mode (Only for BDP-53FD) on page 17.
Color Space RGB Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
YCbCr Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr 422
Select this to output the video signals as YCbCr 4:2:2 signals.
Full RGB Select this to output the video signals as RGB signals. Choose this if the colors
seem too dense and all the dark colors are displayed in a uniform black.
Resolution Auto Select this to choose the resolution of the video signals output from the
HDMI OUT terminal automatically.
480I/576I Output the video signals from the
HDMI OUT
terminal with the selected
resolution.
The resolution can be changed by pressing HDMI , but Auto cannot be
selected.
480P/576P
720P
1080I
1080P
On the BDP-53FD, no video signal is output from the HDMI OUT (MAIN) terminal when the resolution is set to 480I/576I.
HDMI Audio Out Bitstream Select this to output HDMI audio signals directly.
PCM Select this to output HDMI audio signals converted to 2-channel audio signals.
Re-encode Select this to choose the type of audio signals automatically.
Off Select this when you do not want to output the audio signal from the HDMI
output terminal.
Control On Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 17.
Off Select this when you do not want to control the player with the remote control
of the connected AV device using an HDMI cable.
To use Sound Retriever Link, Stream Smoother Link and PQLS (pages 17 and 18), Control must be set to
On
.
HDMI Deep color 30bits Select this when outputting the video signals with 30-bit color.
36bits Select this when outputting the video signals with 36-bit color.
Off Select this when outputting the video signals with normal 24-bit color.
HDMI 1080P 24Hz On Select this when Resolution is set to Auto or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Off Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
HDMI 3D Auto With 3D discs, the disc is played with 3D images.
Off Even with 3D discs, the disc is played with 2D images.
3D notice Yes This sets whether or not to display the 3D notice when playing 3D images.
No
Ne
tw
o
rk
IP setting Select this to set the IP address of the player and DNS server (page 46).
Proxy Server Only set the proxy server if so instructed by your Internet service provider (page 46).
Information Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server
(primary) and DNS server (secondary).
Connection test Select this to test the network connection (page 47).
Internet Connection Enable Select this when connecting to the Internet.
Disable Select this when not connecting to the Internet.
BD-Live connection Permitted All discs are allowed to connect to BD-LIVE.
Partial Permitted Only discs whose safety has been confirmed are allowed to connect to BD-LIVE.
Prohibited No disc is allowed to connect to BD-LIVE.
DLNA Enable Select this when connecting to DLNA server.
Disable Select this when not connecting to DLNA server.
Setting Options Explanation
BDP-52FD_UCXCNSM_IBD_EN.book Page 43 Friday, September 30, 2011 9:59 AM