9.
Wait for both the update and reboot process.
When the system firmware is successfully updated, a message "Update has completed
successfully!" is displayed on your TV and "WAIT" will be displayed on the front panel
display of your player during the reboot process.
The player will automatically start up after rebooting.
If the update fails, check the files in your USB memory device and try again.
10.
Check the firmware version by the same steps described in section A.
If the version has not been updated, then perform the system firmware update again.
11.
Press the "STANDBY/ON" button to switch the player off.
12.
Disconnect your USB memory device after the player turns into standby mode.
Firmware Update FAQ
Q:
What do I do if the power cord is unplugged or a black out occurs during the update?
A:
Power on the player and try again starting from section D. If the player does not start up, the
player will need repair. In such an event, call Pioneer Customer Support Center.
Q:
What do I do if the "UPDATE" message does not appear on the front panel display as described
in step 8 of section D?
A:
There could be a problem with the update USB memory device you created. Try downloading the
firmware file again, create another update USB memory device, and follow section D to update the
player's system firmware.
Q:
What do I do if over 60 minutes have passed and the player remains in the update process or
reboot process?
A:
Unplug the power cord then plug the power cord back in. Power on the player and try again
starting from section D. If the player does not start up, the player will need repair. In such an event,
call Pioneer Customer Support Center.
Contact Information
Pioneer Customer Support Center
http://www.pioneer.eu
------------------------------------------------------------
Copyright(c) 2014 Pioneer Corporation
